Top 20
Proscan PS27123 TV Questions & Answers
Iam missing the power cord to a pro scan tv.
Hi maribeljuan1,
There should be an alternative compatible power cable for your TV, such as the cable to your home PC computer, if you desperately need to use it of course. Or for replacement Just go to any electronic store and ask them if they have the power cable for the model of your TV.
Write down your TV model and ask them if they have the cable for it, if they dont just ask them for an alternative cable which " Will " with your specific model.
I hope this helps, good luck!
Popping sound pictue gone out
This is a classic sound of a switchmode power supply capacitor "popping" this symptom may have many, many causes. It would be best to get a "Quote" for repair. That way you can tell, if you wish to repair or replace.
Ps 27123 have sound, tuning etc only small horizontal color band
Hello bdedrick708,
If what you are trying to say is that you have a 1/4 inch horizontal line across your screen, this means that something in your vertical deflection circuit has failed. This could be the vertical oscillator, the vertical output processor, the vertical coupling capacitor, or the vertical section of the yoke transformer.
If what you are talking about is a vertical line from top to bottom then you are possibly talking about a failed horizontal section of the yoke transformer.
Why so little about the
horizontal section of the yoke? That is because if the horizontal section fails
completely then you would lose high voltage and no line would be present because you would not have raster (screen light).
In any even check the yoke transformer first. Then work back from there.
I hope this helps,
Thank you,
Shuttle83
llc.com/">http://www.electron-age-technologies-llc.com
What is your customer service
Hello amy123478,
Proscan is owned by RCA, but they have very little support for that product any more. RCA created another company to deal with the product it is
http://www.oncorpus.com/ They may have support for your TV set.
The chassis number is CTC169CG5 (This may help you find service data) since this same chassis is used in RCA models.
Any shop servicing RCAs should be able to find this chassis number and provide service to you, if RCA or Thomson Electronics is non-responsive to you.
I hope this helps,
Thank you,
Shuttle83
http://www.electron-age-technologies-llc.com
How to turn off captioned?
Get into the menus, and pick the setup menu. The one at the bottom of the list. The first item is captioning. Use the +/- to change the value to OFF. Then use the menu button to exit, or wait for it to time out.
tom
How to access Input two? Want to hook up a WII
set up channel 90 91 and 92. 90 is for S-video input, paired audio with composite video on 91. 92 is for input 2, composite and R/L audio. You need to enable them in the setup menu by manually tuning to 90/91/91 and then adding them.
tom
Lost remote control
Go to your local shop of electronic parts and ask if they have a remote control for your Proscan PS27123 TV. If they haven't, ask for universal remote control (or go to another shop). Of course it's the expensive way of the problem solution, but it's worth it.
Proscan PS27123 TV Problem
just to be sure, is it vertical or horizontal? Anyway, if it is vertical, it could point out to the vertical Ic section or some loose contacts along the lines. If it is horizontal, it could be a filter capacitor along the horizontal Circuitry. Mark the high voltage capacitors along the high voltage sections.
regards,
chris
Picture Blown Up
Hello jasalf,
This problem is called blooming, and it is caused by poor High Voltage Regulation. It usually denotes a problem in the HV section of the TV. More then likely the problem is in the IHVT (Integrated High Voltage Transformer).
I hope this helps,
Shuttle83
http://www.electron-age-technologies-llc.com
Feb. 17, 2009
No, unless you are receiving over cable or satellite. You will need a DTV converter box if you are using an antenna to receive Over The Air television signals. The Proscan has an analog only tuner, so the ATSC (digital) signals will not be visible.
tom
I have a proscan TV
Good day.
I believe the power supply circuit of your unit got busted. You can also try replacing the fuse. It might caused the problem.
chris
Proscan tv ps27123
a capacitor blew up, or the flyback exploded?, happened to a RCA 27" tv i used to have!
My tv is blinking a blue light when I try to turn it on along with a popping sound.
It sounds like there may be an issue with the power supply or internal components of your Proscan PLDED5030A-RK TV. The blinking blue light and popping sound could indicate a malfunction that is preventing the TV from turning on properly.
Here are a few steps you can try to troubleshoot the issue:
1. Unplug the TV from the power outlet and leave it unplugged for at least 10-15 minutes. This can help reset the internal components of the TV.
2. Check the power cord and connections to ensure they are secure and not damaged. If there are any visible signs of damage, such as frayed wires, replace the power cord.
3. Try plugging the TV into a different power outlet to see if the issue persists. This can help determine if the problem is with the power source.
4. If the issue continues, it may be necessary to contact a professional technician or the manufacturer for further assistance. They can diagnose the problem and recommend the appropriate repairs.
It's important to exercise caution when dealing with electronic devices, especially when there are signs of malfunction such as unusual sounds or lights. If you are unsure or uncomfortable with troubleshooting the issue yourself, it's best to seek help from a qualified professional.
3/22/2024 11:39:18 AM •
Proscan...
•
16 views • 0 helpful votes
Not finding what you are looking for?