20 Most Recent Cisco Valet Wireless Hotspot (M10) Questions & Answers

Title: Can not access internet by other laptop

?· Open control Panel and go to Network and Internet Connection.

?· Open it and select Network Connection

?· After that you see your networks , select and Right Click on it and go to Advance Tab

?· In Advance tab you just see a option like "Allow me to share my network"

?· Click on that option , apply and ok

After that 1 dektop connected with another by LAN and Laptop connected with 2nd desktop By use of LAN cable

it call Series Connection.Like--1st desktop--->2nd Desktop--->Laptop

Otherwise Bring a HUB and You can access internet

Now you can access internet on both laptops

Check your wireless password is entered correctly. They don't connect to your computer, they connect to your wireless router.

Press and hold the reset button of your router and use the WEP or WPA located at the bottom of the device.

The default user is admin and the default password is also admin. After you have access, go to security and change the password to your choice. The wireless password is not set at all, and you should be sure to choose an encryption and password for that.

First you need to find out the speed of your connection. If your connection speed is to slow then that could be the reason. If you have good connection speed then i would suggest getting a faster modem/router. As far as your browser crashing could be the connection speed,or you could have downloaded a virus. I would suggest investing in a good internet security/antivirus program such as Norton. hope this helps

try given link for manualhttp://www.cisco.com/en/US/prod/collateral/routers/ps5855/prod_brochure0900aecd8019dc1f.pdf

SSID is the wireless network name

If no lights show up on your ethernet card then maybe you should look into replacing it. Sincerely, Nick

try to update the Firmware of the router. You can do this by opening the Cisco Connect Software under all programs. It should ask for an update when it initializes, if not then power cycle your network.

talk to CISCO on there official forum. real start here https://community.cisco.com/ why go anywhere else. as rules can be fluid , for sure if security gets more tight every day. talk to them , actual

these are the popular firewall for recent days: ·Packet filtering firewall ·Circuit-level gateway ·Stateful inspection firewall ·Application-level gateway (aka proxy firewall) ·Next-generation firewall

• Packet filtering - ...
• Stateful filtering - ...
• Routing support - ...
• Transparent firewall - ...
• AAA support - ...
• VPN support - ...
• Supports IPv6 - ...
• VPN load Balancing -

Su mensaje no califica como una pregunta o consulta para un problema, intente en otro lugar NO HAGA ESTE SITIO CON SU BASURA Lleve su BASURA a otro lado Su mensaje califica como SPAM

Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM

Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM

ACURTNADA, Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM