20 Most Recent Protron PLTV-32 Television - Page 5 Questions & Answers

to either the coax fitting on the rear or via the audio and video jacks if using a box with those connections.

bad power supply, inverter or main board. Must bring to a qualified repair shop.

Not unless the plugs are identical AND the + and - (polarity of voltage) and the voltage and amperage rating of the adapters are the same--HINT: test the voltage of the bad one at the point where it connects to the set and also do not forget that the socket it plugs into could be broken loose.

The codes for the 32' Protron are 1004 or 1011. However be aware that this may disable your defaults permanently. When we had the cable installed they changed the codes but on doing so, the TV was useless. On power up the led will go from red to green, then go back to red instead of giving a source option. Customer service is agravating and useless; this is Chinese company that is using the name ProtRon to ride on the better make of Proton. We bought it through ShopNBC, definitely a big mistake since they are of no help either. We have taken the TV to a repair shop; they say its a main board but they are having extreme difficulty getting help from Protron; only delays and excuses. There are more issues riding on all this that has prompted my wife and I to seek a class action.

Only the original remote (not a universal) will have the display button on it to turn display either on or off.

HelloIf there is a "Menu" button, on the front panel of the TV, press it, surf through its menu options [display options], and turn OFF the dispay. If there is no Menu button at its front pane. you cant turn the on screen display option without a remote control.

HelloCheck the speaker first. If found OK, and you hear distorted sound, check the setting for sound, by its audio option menu. If all are OK, and still the fault perists, the audio output section of your Tv should be troubleshooted.

HelloThe oscillator section of the power supply is not working. It will be very difficult repair these kind of power supply boards. Replacement as card basis only could be done.

no sound, everything was working fine the night before. woke up the next morning, and turned the tv on, and there was no sound at all. nothing from the TV, DVD, and nothing from the Computer. Please help. [email protected].

HelloJust unplug the tV from AC mains wall socket, and wait for about 10 minutes. Replug the TV and see whehter it helps you. If not the power supply inverter board of your tV should be checked for defect. It is a skilled service work. If you have knoledge in electronics, inform me. I've the repair document to your set. OK.

Try website like Remotes.com u can buy the tv original remote or a very closed compatible remote to the tv original remote.

You have a bad inverter board. See "Shop Jimmy" for your TV model. They will have a photo of the boards you may purchase. One of the best places to check. thanks for asking me.

Hi!

This sounds like a signal tuner (audio/video inputs), or the main board if inputs are on it! It is also plausible to be a bad cap (Capacitors) that are bulging on top and or leaky (brownish stain) causing a harmonic within the power feed to the audio!