20 Most Recent Samsung Bn59-01041a Remote Control Questions & Answers

not screwed just snaped together. try to take apart from the side by inserting small flat screwdriver and bend softly, you will recognize how they put together and dont use much force not to break plastic.

Thanks for using FixYa - a 4 THUMBS UP rating is appreciated for answering your FREE question.

Take the tv remote aparts,there is a screw in the battery compartment.I know this because i have a tv this model too.Take some Q tips soak it with some rubbing alchahols and clean the remote PCB board and wait like about 20 mins for it to dries.Put it back together again and with a new set of batteries.And take some cottons balls soak it with some rubbing alchahols and clean the tv set infer red light sensor on the tv set it self too by the tv LED power light indicaton.This solution should improve ur infer red senor reading like( 2-3 more m).

Down load the TV manual to get the info on the remote, SAMSUNG does not provide user manul for the remote. For example
http://samsung-un-46c6300.com/Assets/content/SAMUN46C6300_User%20manual.pdf

See page 7

Check this link for more details. http://www.manualowl.com/m/Samsung/LN40C630K1F/Manual/137552

There is no reset button to this remote control.

We need to find out first if the remote is putting out the IR signals or not, or the problem is in the TV IR receiver module.
Testing remote control: The remote control puts out IR (InfraRed) signal that human eyes cannot see, to find out if the remote is sending out the signal or not you just point the remote at the digital camera's Lens (Digital Camera can detect IR), you should see flashing light on the camera's screen when any one of the remote button is pushed. If you do see the flashing on the camera, then the problem is in the TV IR receiver or the main logic board; more troubleshooting with scope will be needed to look at the signals. Parts: www.shopjimmy.com www.remotes.com EBAY. AMAZON