Velocity Micro Cruz Reader R101 Tablet PC - Answered Questions & Fixed issues

0helpful
3answers

I can connect too the wifi , but cannot connect the log on the internet

Mine does this too. People r saying to reset it. If that doesn't work it's a corrupt installation and you have to reset everything.
7/9/2022 6:01:42 PM • Velocity Micro... • Answered on Jul 09, 2022 • 94 views
0helpful
2answers

How can I sync my

I have a cruz t301 woould like to know how to sync my tablet with my pc.I have trided the aacount will not work says can not connect to server.Would like to do this so i can use it for my school on line work.Would like your help thank you.
1/20/2018 10:23:51 AM • Velocity Micro... • Answered on Jan 20, 2018 • 218 views
0helpful
1answer

The screen on my cruz

maby a bad battery
11/20/2017 4:02:39 AM • Velocity Micro... • Answered on Nov 20, 2017 • 85 views
0helpful
1answer

How do I update a Cruz tablet.

Try here yet? http://www.driverupdates.org/drivers-download/us/tablet-drivers/
2/2/2015 7:55:08 PM • Velocity Micro... • Answered on Feb 02, 2015 • 765 views
0helpful
1answer

Root a cruz r101

pwough pwough
10/2/2014 11:24:59 PM • Velocity Micro... • Answered on Oct 02, 2014 • 293 views
0helpful
1answer

Tesoar tablet freezing on tesoar screen

Try this: First, turn your tablet off. Then, power the tablet back up by holding down the volume (either + or - ) and power buttons simultaneously. Continue holding the volume button until the screen says "Booting tablet in recovery mode." This will give you a picture of an Android. Tap the android, and you will be given a screen with several options. Move between the options with the + and -, and select with the power button. Go to the option for Factory Data Reset and select it. Scroll down to `the Yes, and then the tablet will erase its memory back to factory settings. Once it has completed, select Reboot Tablet Normally.
5/21/2014 8:42:44 PM • Velocity Micro... • Answered on May 21, 2014 • 312 views
0helpful
1answer

Locked myselfout. Dont remember password can I reset?

You can try pressing the factory reset button (with a paperclip, most likely) when powering up. This should clear out all settings and software and give you a new beginning. If not, contact Manufacturers tech support. Good Luck
4/16/2014 3:37:32 PM • Velocity Micro... • Answered on Apr 16, 2014 • 104 views
0helpful
3answers

Unlock or bypass pattern code

trying to find a solution please help
3/19/2014 2:51:39 PM • Velocity Micro... • Answered on Mar 19, 2014 • 147 views
0helpful
1answer

My cruz tablet wont fully load the internet or keep an internet connection

THIS IS NOT A SOLUTION: Anyone at all have a resolution for this issue? I bought this tablet for my granddaughter and I feel so bad that it won't load the internet! Just like the original poster said Click on the internet icon and it starts to load the google start screen then just as the progress bar on the top gets to the end POOF! It stops loading and goes right back to the 'desktop'. It is driving me crazy. I did a system restore and that did nothing. I tried removing all kinds of programs and that did nothing. VERY FRUSTRATING! I can't believe there are this many people having the same issue and to date no one still has an answer!
3/15/2014 11:15:53 PM • Velocity Micro... • Answered on Mar 15, 2014 • 307 views
0helpful
1answer

How does and android charger look like

A USB cable with a micro-USB connection at the phone or tablet... You can plug the USB directly into your PC, get a car adapter with one or two USB ports, or a small outlet adapter with one or two usb ports.
3/9/2014 9:16:23 PM • Velocity Micro... • Answered on Mar 09, 2014 • 67 views
0helpful
1answer

I have a 7" Tesoar tablet and it worked great for a while and now the only thing it will do is turn off and on. When it's on it stays stuck on the white Tesoar screen.. Can I reset somehow? It will no

If a factory reset to default won't work, which it looks like it won't, I think one course of action is to open the back, disconnect the LI-ON battery, (it probably has a small, delicate three pin micro plug, so care is the operative word!), wait about 10 seconds or so, then reconnect it, and see if it then powers up properly. That is what I did with my T310 when it went into a state of limbo. Word of caution, opening the back will more than likely invalidate any warranty you have.
3/6/2014 2:14:53 AM • Velocity Micro... • Answered on Mar 06, 2014 • 163 views
0helpful
1answer

My cruz wont turn on after i reset it?

Most tablets are still in the factory settings so if u have a professional to look at it he might be able to turn it on and u could then have him look at the charge thing.
1/20/2014 5:54:47 PM • Velocity Micro... • Answered on Jan 20, 2014 • 383 views
0helpful
1answer

I forgot my pattern to my tesoar tablet how can i fix it

Have a try Windows Password Recovery Tool 3.2, it may help you!
7/27/2016 4:49:50 AM • Velocity Micro... • Answered on Jul 27, 2016 • 403 views
0helpful
1answer

Reset pmid1000 password

12/27/2013 2:16:48 AM • Velocity Micro... • Answered on Dec 27, 2013 • 77 views
0helpful
1answer

I hit the lock botton on the side of my cruz tablet how do i unlock

Hold down the button, it should unlock
12/13/2013 6:07:58 PM • Velocity Micro... • Answered on Dec 13, 2013 • 59 views
0helpful
1answer

UNLOCK CRUZ SCREEN

Do a hard reset, you will lose your data, but the lock screen will be gone
11/21/2013 8:13:09 PM • Velocity Micro... • Answered on Nov 21, 2013 • 223 views
0helpful
1answer

How to upgrade to 4.2

go into setting find where it says launcher and if you have the option click to change to that version. if not under launcher look through all of your settings.
11/11/2013 9:39:01 PM • Velocity Micro... • Answered on Nov 11, 2013 • 47 views
0helpful
1answer

My tablet wont ask me if I forget password

GO TO SECURITY REPROGRAM THE PASS WORD
11/8/2013 8:06:39 AM • Velocity Micro... • Answered on Nov 08, 2013 • 54 views
0helpful
1answer

Pattern unlock

If you can't remember the unlock pattern you will need to do a factory reset:
  • Power device off.
  • Press and hold down Up Volume and Power Key for 10 seconds and release after seeing the Cruz logo.
  • You will then be brought to the Recovery System screen with a Android robot and an alert triangle on the background
  • Press the Up Volume Key and the Power Key at the same time once (don't hold them down) then the recovery selections will show up.
  • With the Volume keys scroll and select Wipe data/Factory Reset and make your selection with the Power key
  • With the Volume Keys scroll and select Yes to confirm the action and make your selection with the Power Key
  • Select Reboot system now.
11/1/2013 4:57:27 AM • Velocity Micro... • Answered on Nov 01, 2013 • 88 views
0helpful
1answer

I forgot my pattern code

You will need to do a factory reset:
  • Power device off.
  • Press and hold down Up Volume and Power Key for 10 seconds and release after seeing the Cruz logo.
  • You will then be brought to the Recovery System screen with a Android robot and an alert triangle on the background
  • Press the Up Volume Key and the Power Key at the same time once (don't hold them down) then the recovery selections will show up.
  • With the Volume keys scroll and select Wipe data/Factory Reset and make your selection with the Power key
  • With the Volume Keys scroll and select Yes to confirm the action and make your selection with the Power Key
  • Select Reboot system now.
11/1/2013 4:56:41 AM • Velocity Micro... • Answered on Nov 01, 2013 • 145 views
Not finding what you are looking for?
Velocity Micro Cruz Reader R101 Tablet PC Logo

436 questions posted

Ask a Question

Usually answered in minutes!

Top Velocity Tablets & eReaders Experts

 Mikey
Mikey

Level 3 Expert

6904 Answers

deton8 von Splosion

Level 3 Expert

3342 Answers

winchester
winchester

Level 2 Expert

214 Answers

Are you a Velocity Tablet and eReader Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...