20 Most Recent Archos 101 Internet Tablet 16GB 10.1" Android Tablet (1671641000) PC Notebook - Page 8 Questions & Answers

I have the same problem. No sound at all on my Archos Cobalt 80 tablet. Hasn't been dropped, bumped; just suddenly stopped working. Tablet has been formatted, soft and hard reset, backed up and restored to factory default settings, updated the firmware and still no sound. Any help is appreciated thanks.

flash it chines tablet software

i had same problem with my gadget,i replaced the battery.and have it checked to make sure no reformattingg needed

You should have a micro HDMI port on the tablet. You need an adapter that goes from micro HDMI to regular size HDMI, then an HDMI cable to your TV. Change the TV input to HDMI and you should be fine for video and sound.

Here are the directions. Best way to Factory Reset Archos 101 Android Tablet Forum ARCHOS 101 User Guide Archos Arnova 10b 4G tablet Factory Reset part 2

Try pressing volume up or down!

Every thing is low quality chines junk these days and probably head phone jack input is broken and it is not repairable as all similar items ,

Genrally, iTunes has copy-written ($) material and have to use a decoder to transfer illegally to other than apple products... contact them to authorize legal transfers. Heres a manual: ARCHOS 70 User Guide

To perform a manual reset, All you have to do is 1) Take a paperclip 2) Turn the powered on unit around to the back (reverse) 3) Find the reset hole 4) Push the paperclip in the tiny hole marked 'reset' and the unit should go blank. 5) Restart your device and it should be hard reset More information here: http://www.archos.com/in/support/support_tech/manuals_gg7.html

Firstly Check if your WIFI router is working by accessing the WIFI connection from another computer, tablet or phone. If it does, then use the same WiFi connection settings that it has on your ARCHOS. You could also try connecting your ARCHOS to a friend's WiFi network and if this works, change your access point parameters to similar ones. OTHER TROUBLESHOOTING OPTIONS: 1. Check your WiFi router/modem documentation to see if it has a pairing button that needs to be pressed. Some modems have such a button that must be pressed the very first time you try to make a WiFi connection with a new device. 2. If you have to enter a password (a security code of type WEP or WPA) be very careful that you do not confuse a 1 and I (one and letter "I"), a 0 and O (zero and letter "O"), or U and V. These are common mistakes. 3. When entering a security code for your WiFi access, check the box "Show Password" which will allow you to see exactly what you are typing in. This will avoid any mistakes. 4. Some access points use what is known as MAC filtering. That means, the WiFi access point has a list of access numbers (every hardware device has a unique MAC number) which are the only ones allowed to access to the WiFi point. The person managing the WiFi modem/router should shut off this MAC filtering system to see if this solves the problem. It is recommended to shut off MAC filtering in general as this is now known to be an outdated and ineffective system for WiFi security. If you must use it, you can find your device's specific MAC address by going to Settings >Wireless & Networks > Wi-Fi settings > Menu > Advanced. It will look something like 00:16:dc:5e:9e:39. 5. Try temporarily shutting off the encryption system of your WiFi router/modem to see if the problem has to do with the encryption system you are using. The preferred encryption system is the WPA2.

buy a new charger

what type of repair we are talking of?

Go to Settings >> Security >> Unknown Sources and enable check mark for "allow installations of apps from unknown sources"