Pelican 150 Quart Elite Cooler- White - Page 8 - Answered Questions & Fixed issues
Water dripping from the Shower Head of a Mira Elite QT when unit is off
It sounds like you may have a problem with the internal plumbing of your shower unit. The filter at the bottom of the unit may be clogged, or there may be a problem with the valve that controls the flow of water to the shower head.
To troubleshoot this issue, you could try the following steps:
- Check the filter at the bottom of the unit for any debris or clogs. If the filter is dirty, clean it out and see if that helps stop the dripping.
- If the filter is clean, try shutting off the water supply to the shower and then opening the valve that controls the flow of water to the shower head. This will allow any excess water to drain out of the unit.
- If the dripping persists after these steps, it may be necessary to call a plumber to diagnose and fix the problem. It's possible that there is a problem with the internal plumbing of the unit that will require professional repair.
I hope this helps! If you have any further questions, don't hesitate to ask.
12/27/2022 4:25:40 PM •
Home
•
Answered
on Dec 27, 2022
•
174 views
Can you solder the wires for a splice on a oven temperature sensor that has a melted connector?
Yes, it is possible to solder the wires for a splice on a oven temperature sensor that has a melted connector. Soldering is a common method for making electrical connections, and it can be used to repair a melted connector on a oven temperature sensor.
To solder the wires for a splice on a oven temperature sensor, you will need the following tools and materials:
- Soldering iron
- Solder wire
- Wire stripper
- Heat-shrink tubing (optional)
Here is a general outline of the process:
- Gather your tools and materials.
- Cut off the melted connector from the oven temperature sensor.
- Strip the insulation from the ends of the wires.
- Twist the wire strands together to create a solid connection.
- Heat the soldering iron and apply a small amount of solder to the wire connection.
- Allow the solder to cool, and then apply heat-shrink tubing over the connection (optional).
It is important to follow proper safety precautions when soldering, including wearing protective eyewear and working in a well-ventilated area. If you are not comfortable soldering the wires yourself, you may want to seek the assistance of a qualified technician or engineer.
12/27/2022 2:33:41 PM •
Home
•
Answered
on Dec 27, 2022
•
193 views
What do vessels oil do and how ?
The
oil vessels that you see in the harbor are specially built for carrying oil. They transport oil from one place to another. These are large ships that can carry large amounts of oil. They also have a lot of space for cargo. Oil vessels can run on steam engines or on diesel engines.
Oil and gas tankers are a type of vessel used to transport large quantities of oil and diluted molasses. They are used to transport oil and gas from one region to another.
Rus Marine Oil supplies premium quality Marine Lubrication Oil at a reasonable price in all ports of the Far East, southern Russia, and the Baltic states. Call us right now!
12/15/2022 10:26:28 AM •
Home
•
Answered
on Dec 15, 2022
•
15 views
How do I fix my ceiling lights?
You probably have a bad light switch. Could maybe be the bulb but with the flickering after you turn the switch off, the switch it is intermetinaly (sp) giving it power.
12/7/2022 11:30:13 PM •
Home
•
Answered
on Dec 07, 2022
•
44 views
What is the easiest way to clean floor tile grout?
In a large bowl, combine 2 cups of water, ¼ cup of vinegar, and ¼ cup of lemon juice into ½ cup of baking soda.
Scoop the mixture over the grout lines.
Let it sit for 10-15 minutes.
If needed, lightly work the mixture into the tile grout using a toothbrush.
Rinse with a towel and warm water.
11/25/2022 12:48:12 PM •
Home
•
Answered
on Nov 25, 2022
•
27 views
Not finding what you are looking for?