Disney DT1350-P 13" TV - Answered Questions & Fixed issues
Volume wont work
Make sure someone hasn't pressed 'mute' on the remote. Also, if there is a 'menu' button, trying going in and seeing if someone accidentally changed the settings in there. The other possibility is that if there is a place for headphones to be plugged in, make sure there are none plugged in to the port, because the sound would then bypass the speakers to go out of the headphones.
I cant figure out how to program my remote to my disney mickey mouse tv
Hi. I have been going nuts for the past few days trying to figure this out. I went thru 5 universal remotes and tons of research online and i found only one solution. Not a remote but a R F modulater fixed my problem. You can get one on ebay cheap. Walmart also. Worked for us. Now my daughter can watch a dvd.
Disney princess tv shut off and won't turn
Hi,Sorry, there is not a reset on this TV.No signs of life can be anything from a Fuse, to failed components on the power supply.I suggest having it to a local repair shop which has the training and proper equipment to disassemble the TV and replace the failed component(s).Expect a diagnostic fee of $40 (depending on your location) that is credited toward the repair bill.Thanks
My daughter had purchased model#
Hello,
This TV is made by Emerson so refer to your all in one remote manual and try those codes. You can also look at the instructions for your remote and try running the auto code scan feature.
Thank you for choosing Fixya.
I have a Disney Cars DVD player and I need to set
This tv was produced by some small company for the Disney Corporation,so there are no universal codes out there for this tv.100% i'm sure have original remote.Try website like Remotes.com to buy the original remote.
Need a remote fr disney
Replacement remotes for this model can be found here:
http://www.remotes.com/remotes/servlet/rs?a=Search&o=c&uid=0&m=DT1350-P&uuid=12955839194070
I have a disney tv and the phillips codes do not
Follow the same steps to enter a code but instead of entering code press the channel up button repeatedly until it turns the tv channel and when it changes (dont press up again or else you will have to do it over again). When you get the remote to change channel STOP! and press the enter/ok, or similar button to lock the code in and you should be set. Good luck. If you follow the steps and it doesnt work the first couple of times dont be discouraged, Trust me all universal remotes allow you to set up you universal remote this way i guess they already know people lose the universal remotes instruction manual with all the codes in it! Hope this helps GOOD LUCK too you. Hope this works out for you!!
Not finding what you are looking for?