KLH DA1302 5-Disc CD Changer - Answered Questions & Fixed issues

No. Do you see speaker connections on it?

Welcome to Fixya

Sound like there is a problem with the gears inside the unit. One of my fellow expert was able to resolved the issue here in Fixya. Please refer to this link.

Thank you for using Fixya! If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

clean the darn thing

Hi: Im Ronald Marts in January 2008 I posted a problem with my KLH DA1302 5-Disc CD Changer,it is still posted on this website on the details of my problem I found that with the top off the door will not open or close, the disc will spin but thats all. After checking all wiring, screws for looseness I gave up and put the top on, being frustrated I foregot to unplug the machine before putting the top on. I put my hand on the top in front of the machine to put in the screws on the back, in the meantime my wife pressed the open- close button and it worked, when I took my hand off it quit working, there is a metalic metal strip on the inside of the top in front that has to make contact to the components inside to solve this problem I put two pieces of wood wrapped up in a wash cloth and wedged them on top of the machine and the cabinet it is kept in one on each side towards the front I know It sounds crazy but it works and my wife is estatic, she likes to listen to her CD,s with her cordless ear phones when she does things around the house. I hope this has helped you all with this problem.

Is this a problem? - you're very vague.
Red is right channel out; white is left channel out.

you may have an "intelligent" tv that only turns audio on when video is also present. if your tv is older, then go thru the menu options and look for option that turns back panel inputs to "on"...or it may be as simple as finding that option on the remote control.

I just found your question answering another.

Windsor-10-12-Subwoofer-Manual.pdf

KLH Audio https://klhaudio.com > uploads > 2020/12 > Wi... PDF You can experiment with different configurations, or even add multiple subwoofers to your system (see diagram). 1. 3. 2. CONNECTING YOUR. SUBWOOFER. Ensure that ... 4 pages ..

Question edited for clarity. The website Scribd says it has it, or contact KLH using the details in the manual. https://www.google.com/search?q=klh+asw10-100c+wiring+diagram ..

Check here... https://www.justanswer.com/electronics/4j1p9-klh-r5100-receiver-power-lite-shows-red-standby.html BHAGYASHREE BHUSARE I believe is a Ai Bot.

Below is the manual link, this site does not allow pdf upload I would have done that for you. https://www.manualslib.com/manual/1239446/Klh-Fifty-Four.html?page=2

Any you like. They are not a good speaker. Any Amp with 8 ohm output and maximum of 50 watts RMS or 100 watts peak power. https://www.google.com/search?q=KLH+C130b+speakers My speakers https://www.google.com/search?q=wharfedale+linton ..

Hi Mailk. Goto this link and see if it helps you out. https://www.google.com/search?q=How+to+connect+tv+to+the+kLH+receiverr&rlz=1C1AVFC_enGB797GB798&oq=How+to+connect+tv+to+the+kLH+receiverr&aqs=chrome..69i57.13531j0j9&sourceid=chrome&ie=UTF-8

disconnect offending unit. then play see if same response occurs on the alleged normal unit using the offending cable interchange cables see if you get same result. Means it's bench repair ,internal electronics require specialist equipment to locate the offending item.

buy ????? ???? 19 ???? ? at https://ar.fifacoin.com, enjoy up to 10% off

You could check it by having the unit switched on a touching each of the pins of the device with an insulated tool. Making certain you don't short any of the pins together. You should hear a buzz on each channel. If you get nothing on the right then it could well have gone. However that is a lot of messing about, as the device can be purchased for around £12, it could be easier just to replace it and see if that cures it. After all it is the device that does most of the work, so the chances are it's gone!

If you can post a picture of the fuse it might help in tracking one down. However I should point out that fuses rarely blow on their own. And one blown is a sign of a serious overload, probably in the main amp or power supply section.

This is what is called a 'passive radiator'. It helps the bass response of the system. It is an adaptation of a bass reflex speaker enclosure. Try this link at wiki: Passive radiator speaker

That is sometimes called a "radiator". It's a speaker cone that moves opposite the main woofer and produces sound waves out of sync with the powered woofer. Very sophisticated piece of audio engineering intended to enhance bass response.

It could be an internal short in the amplifier board. What is the model number?

Is this perhaps an antenna issue?