20 Most Recent Koss KS4110 DVD Player - Page 2 Questions & Answers

Bought a new unit. The old unit was a surround sound system in which the previous owner removed the speakers. I wasn't aware of the problem but found out that it would not allow it to play on Dolby 5.1...It would only play DVD's on channel 2, therefore no english etc. Thanks for your help!!!

Installing to what kind of television? Does the tv have component input jacks? do you have to use the rf antenna connector (cable in) because there are no audio/video input jacks?

It is possible that someone has changed the region that the DVD player is in. If the menu is not in English you will need to translate the language to get it back to English in the language selection. Find the region selection in the menu and change to the proper region, this should fix the issue since some DVD work, they probably have a Region code of 0. Cheers.

Check out the Region Codes here:

http://www.hometheaterinfo.com/dvd3.htm

sounds like spring is broken inside

S vid cords are cheap. You can find one at any tech store for about five bucks.

here is where you can just order a new remote. You cant really program this remote yourself.

http://remotes.com/remotes/servlet/rs?a=gmi&uuid=12564800848960&smodel=KS4110&brand_pn=KOSS_KS4110

Alot of cheaper regular universal remotes work as well.
they no longer make the orginal remote any more.

KS4110
Original Remote
(No Longer Available) KS4110
Substitute Remote

there are two things that could be happening here either

1. You need to change the settings on the t.v. to use cable instead of antenna for the programming (easy to spot if channels that are usally on one number are on another)

OR

2. you have requested highspeed internet and digital cable from your cable company, and they have installed a trap to keep you from accessing channels 12-72 or something to that effect because the data stream from your cable modem and the data stream for your digital cable are in the lower freq. band often indicated by a blank(black or blu) screen on certain channels

if scenario 2 is the case call cable company and ask that they remove the channel trap because you are not receiving the service you requested

most likly the cd jammed the tray shut or the motor is gone simply undo the screws on the side and the back take the cover of (MAKE SURE IT IS UNPLUGGED) u should be able to get the dvd out from there just look around make sure nothing is blocking it that you coulndt see from the front

check the connectivity of the charger using a multimeter. if there is anything wrong in it, you might have to open up and replace the wire in the charger. if the connectivity in the charger has no problem, then try replacing your batteries

I did a quick search for you and could not find it.
-Might want to think about a new one. Koss's website no longer lists it as a product.

I have HTV with cable.I can not get this Dvd player to work with remote or with out.I hear the CD and Dvd spin but nothing else.What needs to be done?

I had the same problem and it took an act of Congress to solve it. However, I can tell you that through much more hard work and time than it should have taken I discovered the infrared code for my "One-For-All" remote model URC-4021B00 is--0651. Not sure if it's the same for any other remote control models, but give it a shot.

i cant find the code for my tv i want to be able to turn the sound up and turn my tv on/off with one remote

Hey
I was checking around for you and you can get an orignal replacement remote for your unit at www.remotes.com
Please take a second out to rate my answer!
THANK YOU!

get a refund. This fault is a can of worms mate. A road you do not want to go down

i need the code to program my koss player on the one for all replacement urc 4220 remote

I not remenber the cod of security

i read somewhere you can try 0651

you can get a Y connector (it has 2 inpunt and 1 output) connect both audio's to the "Y" connector and then connect the "Y" connector to the tv and connect your video cable to the tv

i had the same problem last night. On the top row of the remote, just next to the red power switch is a button that says v.select. I pressed it and the image returned to the screen.