20 Most Recent Korg KROSS-61 61-Key Workstation Keyboard/Synthesizer - - Page 2 Questions & Answers

Right away or after it's been working awhile? Try coolant spray on power supply components.

Try resetting the software.

Maybe because the battery needs to be replaced.

I think that the entire touch panel and everything has to be replaced then fully.

You will need to open up the keyboard. Make sure it is unplugged. Once you take out all the screws that hold the top half with the bottom, separate the two carefully. You will have some wires and ribbons attached to both sides. The battery is on the circuit board, it looks like a quarter. Make sure you replace the same size battery.

https://www.google.com search of the internet gives the following result: https://www.sweetwater.com/sweetcare/articles/initialize-reset-preload-korg-x5-x5d-dr/ How to Initialize (reset), and preload on the Korg X5/X5D/DR

• Article #16230
• Updated on Apr 27, 2007 at 12:00 AM

Initialization: Hold Page + and Page - while turning it on. Preload: Global Screen 5A, then select "OK". ROM Check: Hold Edit and Global/Multi while turning it on.

https://www.korg.com/tmp/support/download/index.php/manual/0/90/1945/?country=us&page=manual&prodtype=0&prodid=90&fileid=1945 https://korg-pa-paradise.blogspot.com/2018/04/blog-post.html https://www.manualslib.com/manual/1060488/Korg-Pa60.html

korg pa600 styles download Google Search

https://www.youtube.com/watch?v=0CLTMQ3lldg

Free online manual has a troubleshooting section: http://i.korg.com/uploads/Support/microARRANGER_OM_E1_634617865952010000.pdf

6. Playback (1) Set channel 1 to play.Turn the REC/PLAY key on. Then press the channel key of track 1 (the track you just recorded) to set it to Play (key lit green). (2) Return to the beginning of the song.Hold down the STOP key and press the REW key to return to the beginning of the song (?p.37 "2. Location").

I will assume you want to sync the two as one. I have one of these sitting in a closet. The 3200 will record 12 tracks at a time if I remember correctly. I believe the Korg will sync to Midi Time code. I just wonder if the midi implementation allows for start and stop code. Anyway, I found this information: x2. MIDI messages used by the D3200 Note On (Note, velocity), aftertouch, pitch-bend: The D3200 uses these messages to control effects. Program change: The D3200 uses these messages to switch scenes. Control change: The D3200 uses these messages to control mixer and effect parameters. MMC (MIDI Machine Control): MMC messages can be transmitted from the D3200 to control an external MMC-compatible sequencer or recorder. MMC messages received from an external sequencer or recorder can be used to control the D3200. MTC (MIDI Time Code): The D3200 can transmit or receive MTC messages to synchronize with an external sequencer or recorder. MIDI Clock: The D3200 can transmit MIDI Clock. It can also receive MIDI Clock if you have selected MIDI Clock for the tempo track and are recording the tempo track.

Email Korg customer service in your country for advice, or search the manual if you have it.

https://www.korg.com/us/support/download/manual/0/424/2010/

http://www.korgforums.com/forum/phpBB2/viewtopic.php?t=70279&sid=0a3c1fcbb6e1dac75c1a6975f3a1292f I've found this in my files: 01/W Series Initialization: Hold Reset and Compare while turning it on. Preload: Global screen 7 Press G then E it will if OP turns off write protect in the global menu. None of the resets or reboots will do anything until the synth is allowed to use them. If write protect is ON all changes will be rejected.

Have a read of this manual! https://www.korguser.net/electribe_wave/manual/KORG_ELECTRIBE_Wave_OM_E.pdf

Here's a video showing you exactly what to do! https://www.youtube.com/watch?v=HXFN0LymD0Q

This is the help that the owner manual offers...completely useless. However, it is likely that if your piano isn't turning on, either your connection is bust or your AC power adapter is broken. You can purchase a replacement relatively cheaply. https://www.thomann.de/gb/korg_netzteil_ka_320.htm

Sometimes tuners can be overly sensitive! You've just got to sit in a quiet room and wait for the needle to settle, then give it another try.

The answer is no so you cannot replace a fuse that dies not exist. Time to replace the item.