20 Most Recent
Korg KP3 Kaos Pad Dynamic Effects Sampler - Page 8 Questions & Answers
Can i connect a Bose lifestyle 135 sound bar & subwoofer to a Bose MC1 media center? If so how?
These components are meant to be compatible with each other, providing a seamless audio and video experience. Here's how you can connect them:
- Connections to the Media Center:a. Soundbar Connection: Connect the Bose Lifestyle 135 soundbar to the MC1 media center using an audio cable. Depending on the available ports on both the soundbar and media center, you might use an optical audio cable, coaxial audio cable, or another appropriate audio cable type.
b. Subwoofer Connection: The Bose Lifestyle 135 subwoofer is a wireless subwoofer, which means it connects wirelessly to the media center. During the initial setup process, the subwoofer should automatically pair with the media center. Follow the instructions in the user manual to ensure proper pairing.
- Speaker Setup:
The Bose Lifestyle system, including the MC1 media center, typically uses Bose's ADAPTiQ audio calibration technology. This technology helps optimize the sound based on your room's acoustics and speaker placement. Run the ADAPTiQ calibration process as outlined in the user manual to ensure the best sound quality from your system.
- Remote Control:
Ensure that the remote control provided with the Bose MC1 media center is properly programmed to control both the media center and the soundbar. If needed, follow the instructions in the user manual to set up the remote control for seamless operation of all components.
- Audio and Video Sources:
Connect your audio and video sources (such as Blu-ray players, cable/satellite boxes, game consoles) to the appropriate inputs on the Bose MC1 media center. This allows you to route both audio and video signals through the media center and enjoy them with the soundbar and subwoofer.
- Power On and Configuration:
Power on the Bose MC1 media center and ensure that the soundbar and subwoofer are also powered on. Navigate through the media center's on-screen menus to configure the audio settings, input sources, and any other preferences.
- Testing and Adjustment:
Play different types of audio content to test the sound quality from the soundbar and subwoofer. Adjust the volume, bass, and other audio settings to your preference using the remote control and on-screen menus.
Remember to consult the user manuals for both the Bose MC1 media center and the Bose Lifestyle 135 soundbar for detailed setup instructions and troubleshooting tips. If you encounter any difficulties during the setup process, Bose customer support can also provide assistance.
How do you reset the monster ower hts 1000 mkii?
Press the PowerCenter Thermal Circuit Breaker button in to reset. Please allow
10 minutes before attempting to reset.
If you reset too soon, the breaker will
prematurely sense power overload and
not allow unit to operate.
• If the Circuit Breaker continues to trip,
try moving one or more components
to another PowerCenter. You may be drawing
too much current through one PowerCenter
Sony km7500 no audio output
If the signal goes through this chip I really hope it's no smd.
Change out this chip and check the capacitors around it; resistors too.
Have you tried a signal at the beginning of the actual pre-amp on your print? After this chip? Do you have a signal then? If so, it's obvious to be this chip. Succes.
Why would my sub woofer just stop working on my norcent 1950
There could be several reasons why your subwoofer has stopped working on your Norcent 1950 audio system. Here are a few potential causes:
- Power issue: Check if the subwoofer is receiving power. Ensure that it is properly plugged into a working power outlet and that any power switches or buttons on the subwoofer are turned on.
- Connectivity issue: Verify that the subwoofer is properly connected to the audio system. Ensure that the cables are securely plugged into the correct audio outputs on the Norcent 1950 receiver or amplifier.
- Settings and controls: Check the audio settings on your Norcent 1950 system to ensure that the subwoofer output is enabled and properly adjusted. It's possible that the subwoofer level may have been inadvertently lowered or muted.
- Defective subwoofer: If none of the above solutions resolve the issue, it's possible that the subwoofer itself may be defective. In this case, you may need to contact Norcent customer support or bring the subwoofer to a professional technician for further diagnosis and repair.
Not finding what you are looking for?