Top 20 SkyScan 86709 Atomic Wall Clock Questions & Answers

ASK MAKER FOR THE MANUAL GOOGLE FAILS SO.

http://skyscanownersmanual.com/site/owners-manual

Depending on which country you are in (the UK won't reset for a couple of weeks yet), your clock will automatically reset when it receives the adjusted time signal. If your clock is not receiving the signal, try moving it near a window and away from any electrical interference, or it is possible that your battery is getting low and has not got enough power to receive the signal.

There should be a button labeled "C/F" to change the temperature. I don't own that brand, so I'm not sure if it's on the transmitter or on the receiver unit. Here is a link to the owners manual: Model 86709 SkyScan Atomic Clocks

There's a four-position slide switch on the back of the 86709. Just slide it to your time zone. To view the manual, point your web browser at http://skyscanatomicclocks.com/site/owners-manuals/model-86709/

Please go to your browser and type in the information line Atomic Clock directions. All of the companies that produce this type of clock are listed. I believe SKY Scan has its directions ready to be opened when clicked on! GOOD LUCK!

Look carefully at the back of your clock for a reset button. The temp may have encountered a problem and stopped working. Also, be sure the battery is fresh. Hope this helps.

Hi, The transmitter for your radio controlled clock is the atomic clock in your region, I wouldn't advise trying to replace the batteries in it. I am guessing you are talking about a remote wireless sensor supplied with your clock! Put good quality batteries in this and place it next to your receiver (your clock) while it registers and then you can place it outside or wherever you want it.

Go to the subject line in your browser and type in Atomic clock instructions. Most all of the makers of this type of clock has a HELP section and the instructions included! I hope this helps! D.M. Hall

You can order a replacement transmitter here for $13.75 including postage: http://skyscanatomicclocks.com/site/shop/

With all atomic clocks they will set themselves. Make sure that you have not pushed the manual button (otherwise it will not automatically set), make sure it is away from any interference such as electical cables, radiators etc and then leave it alone until set.Full instructions herehttp://www.serendipity-gifts.co.uk/radio_controlled_clock_instructions_manuals.html

Try temporarily locating it in a different location until it picks up a signal, usually around a window.

How do I reset the time on my atomic clock 8700?

You can get a replacement temperature transmitter here:http://skyscanatomicclocks.com/site/shop/

Suggest you pull the batteries out and do all of the settings from scratch.As you press the settings button, you will be able to pick 12 or 24 hour. Don't enter a time. Just leave it on auto.If you don't get the signal receive icon (looks like a radar antenna) move the clock around and try some other locations.

Outside!

have you found a replacement? Mine stopped working and I need a new one too,

Find out herehttp://www.serendipity-gifts.co.uk/radio_controlled_clock_instructions_manuals.html

After change battery the clock won't work

HelloGet into this link. You can see the user manual for your Skysacn atomeic clock here. You can adjust your clock according to it manual. OK.http://www.atomicclocksstore.com/skyscan-atomic-clock-manuals