Rangemaster Broan 614804 BALLISTA 48IN HOOD1 BRAND IN STOCK - Answered Questions & Fixed issues


May I get the make and model # so i can get you the install manual

Rangemaster... | Answered on Jul 22, 2015 | 391 views


This sound like the pcb for all your cooker hood spares visit our site

You-Tube video "8eLuShj-RAg" placeholder (do not delete)

Rangemaster... | Answered on Jul 07, 2015 | 1,046 views


this sound like the pcb for all your cooker hood spares visit our site

You-Tube video "8eLuShj-RAg" placeholder (do not delete)

Rangemaster... | Answered on Jan 08, 2010 | 1,710 views


hood should be connected to a fused spur outlet which you havent found. try removing the chimney and you may find it there. chimney only held by 2 screws at top usually.the fuse in the outlet sometimes goes when bulbs blow

Rangemaster... | Answered on Jun 03, 2007 | 1,078 views


My crystal ball is all fogged up. I cannot see the make and model of replacement timer nor the original timer module.

Rangemaster... | Answered on Mar 29, 2019 | 51 views


If they supply the correct sized jets for Calor Gas, yes.

Rangemaster... | Answered on Feb 14, 2019 | 56 views


Check for a controller board. Probably that or a temp sensor.

Rangemaster... | Answered on Jan 18, 2019 | 62 views


Could be a broken resistance. Good luck.

Rangemaster... | Answered on Jan 08, 2019 | 59 views


Usually by taking the control panel off the top .

Rangemaster... | Answered on Oct 31, 2018 | 48 views


I’d be looking at wiring both in Stove and house. If that’s not comfortable to you, call repair tech or electrician

Rangemaster... | Answered on Oct 31, 2018 | 52 views


Thanks for your post! I believe there are many who feel the same satisfaction as I read this article! I hope you will continue to have such articles to share with everyone!
If you require Geek Squad Protection visit https://geeksquadprotectionplan.net/

Rangemaster... | Answered on Oct 13, 2018 | 60 views


Check your circuit breakers for a kitchen circuit that is off. Most range hoods are wired to a different circuit than the cooktop/range. Next check if any nearby GFCI (ground fault) or AFCI (arc fault) outlets aren't working. If the outlets have test/reset buttons, try to reset them. Warning: if these repeatedly trip, there may be a leak getting to your wiring (GFCI) or an insulation problem or loose wire that is causing a potential fire risk. Alternatively the outlets could be damaged and need to be replaced.

I hope this helps.

Cindy Wells
(My range hood is wired to a lighting circuit. Thus it's not on a GFCI circuit. However, your wiring could be different.)

Rangemaster... | Answered on Sep 14, 2018 | 52 views


belling induction top on belling electric coocker ER47 error code. none of the plates work,

Rangemaster... | Answered on Aug 02, 2018 | 1,017 views


Most likely you need to remove burner caps and clean out holes. While it is off turn it on for a sec and see if you small gas. CAREFUL just a sec.
A good cleaning is best before you call your gas company. Our's PG&E do'es it for free check with yours before you call a repairman.

Hope this helps Mike

Rangemaster... | Answered on May 31, 2018 | 43 views


due to safety issues - and possibly injury from a hot burner when you think it is turned off - talk to a local repairman in your area.

Rangemaster... | Answered on Mar 26, 2018 | 35 views

Not finding what you are looking for?
Rangemaster Broan 614804 BALLISTA 48IN HOOD1 BRAND IN STOCK Logo

9 questions posted

Ask a Question

Usually answered in minutes!

Top Rangemaster Kitchen Ranges Experts

Ismael Rodriguez...

Level 2 Expert

184 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Are you a Rangemaster Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...