20 Most Recent Pioneer DEH-P7600MP CD Player Questions & Answers

Turn the volume all the way down then up. This will cancel any mute. If not you have a different issue there. Let me know.

Sounds like a blown output on those two speakers. Should be a quick fix just replacing the integrated circuit if that is the case at any hi fi technician

try going through the wirering.... that wont probably make it work but you got to start somewere to find your solution

When the rear output setting is "rear s/p:SW", you cannot adjust the front rear spreaker balance. Go to the rear speaker output from function and select "rear sp/full".

Could have the speakers wired up wrong.

Follow the instructions on page 46 of the manual.

do you have power going to both the red and yellow wires? you might want to make sure you have a good ground.

12v + main power is yellow

black is ground

red is accessory

blue/white is amp trigger

blue is auto antenna

fr left + white

fr left - white/black

fr right + grey

fr right - grey/black

left rear + green

left rear - green/black

this should help ya

Hi there,

On the EQ on the ipod turn it to bass boost if not try a new cable

go to the web link and download the user manual at the Pioneer support site, it is free

http://www.pioneerelectronics.com/PUSA/Support/CarAudioVideo/In-Dash/CD-Players/ci.DEH-P7600MP.Support

Shut it off then hold the function button, cycle through till you find your option to turn it on, the turn the radio back on and use you source button to change to CD, TUNER, and AUX

I've tried the same thing trying to get it to work without having to buy the aux adapter for it.

You need to buy 2 items to get your pioneer to work in aux.

1. buy the Pioneer auxiliary input adapter CD-RB10
2. buy a wiring harness that has 2 rca inputs on one end and a male plug to plug into your mp3 player on the other end.

You should be able to find these online or even at any electronic stores that have car audio installation as a service.