Top 20 Mach Speed Trio Stealth G2 Tablet - Android 4.0 Ice Cream Sandwich, 7 Questions & Answers

Most tablets available nowadays are Android-based ones. And most of them can be "factory reset" to leave them as brand new.First, understand that if you continue, all the information you already added to your tablet will be erased. If you have any info you need to retrieve, please, do not go on and try something different, OK?All right... Let's go on... The best way to know how to factory reset (or "hard reset", as it is also called) your device is to check in the Internet if there is already a description of the whole process. Assuming that you have a Samsung Galaxy Note 8 tablet, search in Google for "how to factory reset a Samsung Galaxy Note 8 tablet?" Follow the instructions and you will have your tablet running as if it had just been taken out of its box!If you cannot find the instructions for your specific device, you could, then, try to check if it can enter recovery mode. First, completely switch off your tablet. Then, press at the same time and maintain pressed the "Power" button and the "Volume Up" button and wait for the device to power on, when you can release the keys. An "Android System Recovery" page should appear. If that is the case, you can navigate through the options using "Volume Up" and "Volume Down" keys. Go to the "wipe data/factory reset" option and activate it, pressing the "Power" button. Your tablet should reset (it will take a while). If you didn't enter the reset page with those keys, repeat the process, this time pressing "Power" and "Volume Down" keys (different tablets have different combinations of keys to enter recovery mode.)Hope you may find this information helpful!.

Hi Johnny, The link below is a YouTube video showing how to fix your tablet, Also there's video's down the right side of the link that may help as well....CHEERS.. How To fix any Android Phone Tablet that won turn on

I am not going to say no for sure but 90 percent sure there is not. The problem is you would have to scale the signal down to a composite signal. Now that can be done but at a pretty hefty cost and that is if the cable is available to come off of your tablet. From there it would have to go from 1080P to HD15. Then you would have to have a HD15 to composite scale converter. Then go to the tvs RCA input. The scale converter, the right one, is going to be about 200 bucks.

Settings > Language and Input and tap on Language which is the top option on right.

Found these two youtube videos; hope helps you TRIO Stealth G2 with WiFi 10 1 Touchscreen Tablet TRIO 10 1 g2 Stealth Elite Android Tablet Update 2 Testing Recovery Mode... You can find more info if you input google search for Youtube Mach Speed Trio Stealth G2 Tablet

tap setting slide wi-fi to on position the device will autoscan for wifi select your wifi and enter your wifi password

This should work on any Android 4.0 and newer tablet. To take a screenshot on your device, press the Volume Down and Power keys at the same time. The screen will flash, you'll hear a sound, and you'll see a framed image appear and fade into the notification bar. The "Saving screenshot" notification will appear.

if other solution fails, you can do a hard reset.

follow this procedure.

1. switch the tab off. after,

2. long press power button +
volume down key simultaneously.

3. after it shows the logo then
release the power button but
continue pressing the volume key
until the wipe or reset menu
appears.

try it, it works and start thngz afresh

power it off , remove any sims connect usb to pc an try to power up an force debug mode. its kinda random so try several times .

Try a reset. There is a reset pinhole on most tablets to do this. Check your manual if you have one or try to find one online. You open a paperclip and put it into the reset hole and push gently. This will cause it to shut down and reset to factory default. Something is wrong with your operating system to cause that. . You will lose any data or apps you might have saved.

The free Wi Fi router may have run out of IP leases on its DHCP server just when you were trying to connect the tablet. If the leases are as an example say one week long then if lots of people connect to the free wi fi they get a lease for one week. So if the device comes back within the week it already has an IP address assigned to it and works. If a new device comes along it has to ask the DHCP server via the WI FI to assign it an IP address. If all available IP addresses are leased from the WI FI router the device will not get assigned an ip address. Would suggest trying to connect the Tablet on another Wi FI system to test it works. I had this happen on my mobile phone when I was in Surfers Paradise in a Coffee shop and suspected the lease time on the WI FI router was too long for the amount of short term customers using the coffee shop. (the staff had no idea on why the Wi FI was not working so it would have been pointless to try and explain this concept to them and how to change the lease time on the dhcp server) Also there is a limit to the simultaneous number of users on a Wi Fi frequency on one access point . Unless the WI FI uses multiple WI FI access points.

Through the microchip. Download to the chip. Put the chip in an adapter and copy to the pc .

Look in the settings page, probably under general, this will have all the details of your tablet such as model, serial number etc!

The only way will be to replace the battery. Lithium battery's only have a limited service life, and begin to degrade quite markedly after a couple of hundred charges. The older the battery is, the less capacity it has for storing electricity, so your Tablet has detected that the battery within has lost 50% of it's original capacity. If the Tablet is relatively new and you have not recharged it many times, you may be able to claim a replacement battery under warranty from the supplier {:o)

you can download the manual from here Manuals

Plug it up to your computer or laptop using your usb cord. DO NOT remove the SD card. Double-click My Computer and access your Trio Stealth G2 SD card that way. You should be able to see your pics if the kids did NOT do extreme damage.

Why is it difficult to remove! Is the card in upside down?

Hi, Does the device have a password lock on it. If it does try removing this first, then attempt a hard reset. You can access the engineers menu by holding the volume - button and then pressing the power button whilst turning it on. Other than that the only other option is to reload the ROM with a flash utility. But this is not for the faint hearted :-)

you might consider asking your question in a Android support forum such as XDA Android Help Troubleshooting Have a Magical Day K

I would take it back to the Kmart & request to speak to the Boss tell them you got it as a present & explain that its messed up & try to get another one.