20 Most Recent Pioneer PureVision PDP-434HDE 43 in. HDTV Plasma Television - Page 4 Questions & Answers

Pioneer is not great about updates. Here is a link to the user manual. If has been purchased in the last year it should be up to date, and i would contact people where it was purchased.https://www.pioneerelectronics.com/StaticFiles/Manuals/Home/BDP-31FD_OperatingInstructions0831.pdf

Check out Amazon or ebay your bound to find it.

first is to hear if sound is there when a DVD etc is connected to one of the rear audio and video inputs on the set.Also check speakers in the set are in menu switched ON and not OFF.If a cable box, sat box, receiver are in use check their settings for sound also==not a bad idea to unplug each unit and then after a few minutes plug each back (set , box, etc) to allow each to try to boot up.Let me know what you find.

there is no problem......

Hello Socorro, for what you are saying, your Pioneer is not ventilating the heat produced by the circuits, internally your TV has a series of internal fans, to cool the heat produced by the circuits I suggest you communicate with a specialized technical service I hope you can solve the problem Greetings Franco Dosil Hola Socorro, por lo que comentas, tu Pioneer no esta ventilando el calor producido por los circuitos, internamente tu TV tiene una serie de ventiladores internos, para enfriar el calor producido por los circuitos Te sugiero que te comuniques con un servicio tecnico especializado Espero puedas resolver el problema Saludos Franco Dosil http://www.pioneerelectronics.com/pio/pe/images/portal/cit_11221/290938192PDP42A3HD_US_0420.pdf

Hello Michael, indicate the model of your TV pioneer Test if the remote control works, remove the batteries, observe the contacts of the batteries, which are clean, otherwise, clean them so that the batteries make good contact Once the batteries and contacts have been checked, put them back Take your cell phone, put it in camera mode and point the emitter LED of the remote control to the camera, press the keys and see if the emitting LED lights up, if so, try directly with the TV if it does not turn on, you could carefully disassemble the remote control and clean the contacts and the rubber keyboard internally, Do not Use Alcohol to clean the rubber keyboard, you can clean it with warm water and detergent then let it dry very well, the contact plate, you can use a cloth with a little liquid to clean the glasses, the idea is to remove the rubber residue that is on the contacts then arm again and try, if not you have results consult a specialized technical service and if you try, you see in the camera that the LED turns on, but the TV does not, then it takes the two devices to the specialized technical service I hope you can solve the problem Greetings Franco Dosil Hola Michael, indica el modelo de tu TV Pioneer Prueba si te control remoto funciona, s?cale las pilas, observa los contactos de las pilas, que se encuentren limpios, sino es as?, limpialos para que las pilas hagan buen contacto Una vez controlado las pilas y contactos,vuelve a colocarlas Toma tu celular, pon en modo c?mara y apunta el Led emisor del control remoto hacia la c?mara, presiona las teclas y f?jate si se ilumina el Led emisor, si es as?, prueba directamente con el TV sino prende, podr?as desarmar con cuidado el control remoto y limpiar internamente los contacto y el teclado de goma, No Uses Alcohol para limpiar el teclado de goma, lo puedes limpiar con agua tibia y detergente luego d?jalo secar muy bien, la placa de los contacto, puedes usar un pa?o con un poco de liquido para limpiar los vidrios, la idea es sacar el residuo de goma que hay sobre los contactos luego arma nuevamente y prueba, sino tienes resultados consulta a un servicio t?cnico especializado y si pruebas, ves en la c?mara que el Led se enciende, pero el televisor no, entonces lleva los dos aparatos al servicio t?cnico especializado Espero puedas resolver el problema Saludos Franco Dosil

Hello Michael, indicate the model of your TV pioneer Test if the remote control works, remove the batteries, observe the contacts of the batteries, which are clean, otherwise, clean them so that the batteries make good contact Once the batteries and contacts have been checked, put them back Take your cell phone, put it in camera mode and point the emitter LED of the remote control to the camera, press the keys and see if the emitting LED lights up, if so, try directly with the TV if it does not turn on, you could carefully disassemble the remote control and clean the contacts and the rubber keyboard internally, Do not Use Alcohol to clean the rubber keyboard, you can clean it with warm water and detergent then let it dry very well, the contact plate, you can use a cloth with a little liquid to clean the glasses, the idea is to remove the rubber residue that is on the contacts then arm again and try, but if you have results consult a specialized technical service and if you try, you see in the camera that the Led is turned on, but the TV does not, then it takes the two devices to the specialized technical service I hope you can solve the problem Greetings Franco Dosil Hola Michael, indica el modelo de tu TV Pioneer Prueba si te control remoto funciona, s?cale las pilas, observa los contactos de las pilas, que se encuentren limpios, sino es as?, limpialos para que las pilas hagan buen contacto Una vez controlado las pilas y contactos,vuelve a colocarlas Toma tu celular, pon en modo c?mara y apunta el Led emisor del control remoto hacia la c?mara, presiona las teclas y f?jate si se ilumina el Led emisor, si es as?, prueba directamente con el TV sino prende, podr?as desarmar con cuidado el control remoto y limpiar internamente los contacto y el teclado de goma, No Uses Alcohol para limpiar el teclado de goma, lo puedes limpiar con agua tibia y detergente luego d?jalo secar muy bien, la placa de los contacto, puedes usar un pa?o con un poco de liquido para limpiar los vidrios, la idea es sacar el residuo de goma que hay sobre los contactos luego arma nuevamente y prueba, sino tienes resultados consulta a un servicio t?cnico especializado y si pruebas, ves en la camara que el Led se enciende, pero el televisor no, entonces lleva los dos aparatos al servicio t?cnico especializado Espero puedas resolver el problema Saludos Franco Dosil

Google the manual or try the manufacturers web site for it if there are no external control buttons.

This could be an issue to do with your power board. You need to see a qualified tech. Also, ask this on this link http://electronics.co.ke/

Pioneer PRO-R06U

Try checking these two sites. Free User Manuals and Owners Guides ManualsOnline com ManualsLib Makes it easy to find manuals online

8 or 12 blue blinks repair service on eBay, item#123220417873

That model doesn't support 1080p
Change to 720p and you're done

20 Most Recent Pioneer PRV-LX1 DVD Recorder Questions & Answers ...

www.fixya.com > Forum > Televison & Video > Pioneer

Aug 3, 2006 - Recent Pioneer PRV-LX1 DVD Recorder questions, problems & answers. Free expert ... My Pioneer PRV-LX1 will not boot up ... Internal battery replacement. Internal battery replacement 10 posts Sep 24, 2013 My Pioneer PRV-LX1 will not boot up 11 posts Sep 24, 2013 Pioneer PRV-LX1 DVD Recorder 11 posts May 1, 2012 SOLVED: Pioneer PRV-LX1 DVD Recorder will not ... 10 posts Feb 16, 2011 More results from www.fixya.com

There should be buttons on the TV itself to try if your remote is not working. My guess is that SkyeTV comes into the TV through a HDMI cable, so look for HDMI input as source, not "Skye."

The hdmi cord must be connected to your tv and the other device. Your tv should recognize this immediately. When plugging in new cords. Unplug tv first. This will help it to reset itself.

Does it happen with one CD or every one tried? I had a CD of my favorite Iron Butterfly songs that was store bought. In my case, it was defective. If this is not your case, your laser could be weak or misaligned. Take it to a repair shop. Good luck.