20 Most Recent Pioneer VSX-D308 Receiver - Page 4 Questions & Answers

To factory reset your Pioneer VSX-D508 audio receiver, you will need to follow these steps: Turn off the receiver. Press and hold the "Tone" and "Speaker A" buttons on the front panel of the receiver. While holding these buttons, turn the power back on. When the display shows "Initialize," release the buttons. The receiver will now begin the factory reset process. When it is finished, the display will show "Completed." Turn the receiver off and then back on again to complete the reset. Keep in mind that this process will reset all of the settings on your receiver to their default values. You will need to reconfigure any settings that you have changed since you purchased the receiver.

There could be a few reasons why you are not getting any sound from your vintage VSX 5600 Pioneer home theater system. Here are some things you can try:

1. Check the connections: Make sure all of the cables are securely connected to the appropriate ports.
2. Check the power: Make sure the home theater system is turned on and the power cord is plugged in.
3. Check the volume: Make sure the volume on the home theater system and the volume on your TV are turned up.
4. Check the input: Make sure the home theater system is set to the correct input.
5. Check the speakers: Make sure the speakers are turned on and properly connected.

It is not recommended to attempt to reset a device with no power. If the power is off, the device will not be able to respond to any commands or perform any actions. If your Pioneer VSX-AX3 is not turning on or functioning properly, there are a few things you can try before attempting to reset it:

1. Make sure the device is properly plugged in and that the outlet is functioning properly.
2. Check the power cord for any damage, such as frayed wires or loose connections.
3. If the device is connected to a surge protector or power strip, try plugging it directly into a wall outlet.
4. Try a different power cord or outlet to eliminate the possibility of a problem with the cord or outlet.

If none of these steps help, you may need to have the device repaired or replaced.

Question edited to toss in some CAPS. Question moved from Cars and Trucks category. Service Manual links https://www.google.com/search?q=%22pioneer+rx-570%22+belt+replacement ..

Transformers are standard items. https://www.google.com/search?q=9523+supply+transformer https://www.google.com/search?q=pioneer+z-a25m+parts+list ..

To connect a Kenwood GE 7030 equalizer to a Pioneer SX-217 receiver, you will need to use the tape record out and in jacks on the back of the receiver. Here is a general outline of the steps you can follow to set up the connection:

Locate the tape record out and in jacks on the back of the receiver. These are typically labeled "TAPE MONITOR OUT" and "TAPE MONITOR IN."

Locate the tape in and out jacks on the back of the equalizer. These are typically labeled "TAPE IN" and "TAPE OUT."

Use a pair of RCA cables to connect the tape out jack on the receiver to the tape in jack on the equalizer.

Use another pair of RCA cables to connect the tape out jack on the equalizer to the tape in jack on the receiver.

Turn on the equalizer and set the volume and tone controls to your desired settings.

Turn on the receiver and select the tape monitor function. You should now be able to hear sound through the speakers.

If you are still having trouble getting the equalizer to work, it is possible that there is an issue with the cables or with one of the components. You may want to try using different cables or checking for any visible signs of damage on the components. If you are still having trouble, it may be helpful to consult the user manual for the receiver or the equalizer or to seek the assistance of a professional audio technician.

Hi, Please check that the mute button on the device or any associated remote control is not stuck in the down/pressed position. If not, then please switch the sound source and test the device for sound again. Otherwise, we can move onto a power cycle of the device. Thank you.

FL OFF could indicate a problem with the power supply or the cooling fan inside the receiver. Try unplugging the unit to reset the error code. If the error persists, the receiver needs to be serviced. If the Pioneer VSX-90 is still under warranty (1 year), contact the manufacturer. Otherwise, decide if it is worth fixing (including the shipping costs and minimum service fee). I wish that I had better news for you. (There are service manuals available for sale online. I know nothing about these vendors.) Cindy Wells

There may be a problem with the stereo itself, or with the power supply. If the stereo is plugged into an outlet, try plugging it into a different outlet to see if that makes a difference. If the problem persists, you may need to consult a stereo repair specialist.

amazon HCDZ Replacement Remote Control for Pioneer AXD7246 XXD3038 XXD3039 VSX-D412 VSX-D412-K VSX-D412-S VSX-D309 Audio Video Multi-Channel Receiver

Old technology and new technology often don't mix. Your television is new and geared up for Bluetooth and HDMI, your old surround sound system is composite video and audio. You need to test the television with something else, and then check the surround sound with a different input. If they both work then you know it is a compatibility issue. Your best bet is a new Bluetooth Sound Bar that is as good as the television.A similar issue was posted here yesterday, so you are not alone.https://www.fixya.com/support/t29896811-jvc_rx_6018v_not_working_tv..

Your pioneer receiver should pickup radio signals. Set the receiver to fm and make sure volume is up and mute is not on. Installing an antenna will bring in more stations.

Hi, Please double check that you've adjust the volume on the speaker and test sound with multiple sources (ie CDs, DVDs etc) to ensure that the volume/sound issue is cause by the speaker and not the item that it's attempting to play. You can also check for any disconnected wires going from or to the speaker. Thank you.

Have you solved ???? Thanks .. I have the same problem

Smash it against the wall then buy a new unit from best buy, they have a great return policy.

I don't have a stand-alone cd recorder but like many people I have burned discs on the computer and had many disappointments. While some disc drives are clearly better than others, for no apparent reason, there does seem to be more reject discs with some software than others. Particularly disappointing is the Nero burning software that performs well when it is first installed but seems to deteriorate fairly quickly with every computer restart. I know nothing about such things so I am only guessing the cause might be that Nero displaces some Windows components and Windows seems to try repairing itself when booting. Like most things these days, especially digital things, your cd recorder is in fact a computer that depends entirely on the software loaded into it, software that could degrade or become corrupted over time. While it is possible the disc drive (laser perhaps) has become less potent it wouldn't be unreasonable to suspect the software and I suggest you contact Panasonic. It is probable, like many things requiring software, early versions were found to have problems and would be periodically updated.

hiKNOW most technical words , as in difference of CARTRIDGE OR stylus (or needle) inside it, are not used clearlyThis page https://audiokarma.org/forums/index.php?threads/purchased-pioneer-pl-950-new-to-vinyl.543166/gives a cartridge substitute: "For cartridges I have seen many recommend the Audio Technica at-95e."Before buyin see- https://www.audio-technica.com/en-us/at95e for the cartridge.A needle only ebay- Enhanced Elliptical Stylus Needle Audio-Technica ATN95E AT95E Cartridge 710-DE

I would check two things... First make sure your wires are not connected in reverse order from the speaker to the cassette deck. Second I would check for a short in the wire between the speaker and the cassette deck. You can do this relatively easy with a fluke meter. That's all I can think of hope it might help

You are aloud to post pictures of the back of your receiver. It would be easier to explain with pic.