20 Most Recent
EliteGroup P4VMM2 Motherboard - Page 2 Questions & Answers
I need drivers for my USB modem
Try the manufacturer of the modem website.Get onlineand got to www.google.com In the google search box type: "AcerSupport" (without the quotes and put your manufacturer name before Support). Look for downloads and drivers. Enter your model number and operatingsystem when requested. Download and install the drivers.You can also try Driver Guide at:http://www.driverguide.com
Is gfx 5500 compatible with
Hello !
I was looking over this motherboard over the internet. I saw that it has an expansion slot of AGP 4X slot. Geforce FX 5500 is also AGP compatible.
So to get to the point, yes, they are compatible with each other.
All the best.
Com
my webcam canoot function?
click start control panel view devices and printers you should see your webcam from there if you are have trouble with your webcam" click start control panel administrive tools ,computer management ,device manager scroll down image devices you could see a yellow question mark? right click to reinstall drivers or update driver: hope this helps
Cant play any audio player
if you are having problems with your sound
if your computer came with a motherboard disc the sound drivers could be on it
click start control panel administrive tools computer management device manager scroll to sound,video and game controllers you might see a yellow question mark? Right click to reinstall drivers or uninstall
click start control panel sounds and audio,volume,advanced,speakers make sure you have selected the
(((appropriate speakers))) also audio you will find 3 drop down lists make sure you have the correct settings there
also
click start control panel sounds and audio devices select advanced there might be a tick in the mute box untick it
click start control panel sounds and audio devices you can adjust the volume there also select speaker volume you can change your settings there you can also tick in the box place icon in taskbar
if his does not fix the problem
have you tried this control panel sounds and audio,volume,advanced,speakers select the appropriate speakers from the drop down list or navigate to the device manager scroll to system devices + to expand,system speaker right click properties then select use this device (enable) also you might check
the speakers plug/outlet is usually at the back of the computer you will have to open up the computer to check the lead attached to the rear of the input plug make sure the connection is good
try cleaning your computer of dust using a fine air blower from a compressor making VERY sure that there is no MOISTURE in the air line specifically around the sound card and the CPU central processing unit dust causes static to build up in a computer
make sure you have an earth ******** before touching any parts inside your computer
hope this helps
Results for: Microsoft Product: Windows
There is severe corruption in the kernel (the core files) of your OS and the drivers are no longer loaded. Since you don't know what caused (probably some bad drivers since this motherboard is too old and doesn't have the correct Win 7 ones) it the only sure way to resolve it is to perform a full reinstall of XP.
I lost my drivers and manual for my P4Vmm2
Hi, The elitegroup webiste is http://www.ecs.com.tw From there you can click on the downloads tab in the top right corner.
This page will then bring up a pane on the left hand side of the screen where you can enter the details of the product you are looking for. So on the first drop menu select motherboad.
Second Drop menu select Socket 478 from the bottom of the list.
Third drop menu scroll down until you see your model number (P4Vmm2)
The fourth drop menu will then ask you for a version. I would have dirctly posted you a link to the downloads page but i was unsure of your motherboard version. If you know the version number you can put it in there and it will take you to a page listing the drivers you are after and the manual.
If you do not know the version of your motherboard model you can download a free program called SIW which will tell you the details of your computer. This Program is available for download at:
http://www.gtopala.com/siw-download.html
Its a 1.3Mb download which you can install and run and click on the motherboard tab for a full list of details on your motherboard.
Hopefully you can see the motherboard version written somewhere on your motherboard though.
Hope this helps, Daniel.
My Desktop PC don't display
Test your PSU or replace it if your power supply units fan
is not working your PSU is faulty
One bad lead can cause a computer to continue on a cycle or
to shutdown or fail to detect/ boot up a computer hard drive
Test all leads that attach to your hard drive including
electrical extensions,IDE,SATA
the leads from your
"((motherboard
to your hard drive))" make sure they have a secure connection and
are not faulty or just replace them they could be faulty
make sure all leads that
are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections
and are not faulty even the electrical extensions or just replace them they could
be faulty a computer
needs its connections to continue its cycle and have an end so any faulty leads
will end up with a computer error hope this helps
My desktop tower refuses to
Test your PSU or replace it if your power supply units fan
is not working your PSU is faulty
One bad lead can cause a computer to continue on a cycle or
to shutdown or fail to detect/ boot up a computer hard drive
Test all leads that attach to your hard drive including
electrical extensions,IDE,SATA
the leads from your ((motherboard to
your hard drive)) make sure they have a secure connection and are not
faulty or just replace them there probably old and faulty
make sure all leads that
are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections
and are not faulty even the electrical extensions or just replace them they could
be faulty a computer
needs its connections to continue its cycle and have an end so any faulty leads
will end up with a computer error hope this helps
Jumper giude
During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up process to enter BIOS the scroll down to advanced bios features press enter change your first boot device to cd,press escape then press f10 to save to cmos to restart (note after you have loaded the operating system you must go back and change the first boot device to your hard drive) The BIOS is AMI. Under ADVANCED SETUP: The options listed for 1st,2nd ,3rd Boot device include:IDE-0 means Pri master ?IDE-1 means Pri slave ?IDE-2 means Sec master ?IDE-3 means Sec slave ? hope this helps
Master/Slave designation is determined by jumpers on IDE drives. Most drives have adequate markings on them to identify these jumper positions. If not marked clearly, you will need the manufacturer's data to determine that designation. If you are curious about a working system just power-up in set-up mode (usually by depressing (f1-or-f2) during boot-up sequence, your system-bios will display this information for you.
Not finding what you are looking for?
