20 Most Recent Technics SL-DZ1200 CD Player - Page 9 Questions & Answers

Hi Thomas, as you say, it's not the engine, nor the integrated engine Most likely, the pitchel potentiometer that generates the problem I would try to clean it, applying a small amount of contact cleaner and test if there are improvements Keep in mind that it is the Pitch potentiometer that is changing the speed Comment if the suggestion served Regards Franco Dosil Hola Thomas, por lo que comentas, no es el motor, ni el integrado del motor Lo mas seguro es que el potenciometro de pitch el que genera el problema Yo intentar?a limpiarlo, aplic?ndole una peque?a cantidad de limpiador de contactos y probar?a si hay mejoras Ten en cuenta que es el potenciometro de Pitch el que va modificando la velocidad Comenta si sirvi? la sugerencia Saludos Franco Dosil https://www.manualslib.com/manual/387776/Technics-Sl-1200mk2.html

It sound like the main power amp has failed. Look at whatever is on the big heatsink as to the cause. As with any device from "friends" it could be that someone has tried to fix a fault and made a mess. So look carefully at the soldering to any of it's parts.

Hello Denis, I sent you the link where you can get the manual for your Technics SXE 11 I hope it helps you Greetings Franco Dosil Hola Denis, te envio el link donde puedes conseguir el manual para tu Technics SXE 11 Espero te sirva Saludos Franco Dosil https://www.ebay.com/itm/Technics-Organs-Service-Manual-SX-E11-/264250909216?_ul=AR

Hi Greg, I sent you the link so you can download the circuit of your Technics su-z780 I hope it helps you Greetings Franco Dosil Hola Greg, te envio el link para que puedas descargar el circuito de tu Technics su-z780 Espero te sirva Saludos Franco Dosil https://www.vintageshifi.com/repertoire-pdf/pdf/telecharge.php?pdf=Technics-SUZ-780-Schematics.pdf Elektrotanya for electronics experts

Hello Richard, I send you the link where you can download the user manual and service manual of your Technics BD-SL22 I hope it helps you Greetings Franco Dosil Hola Richard, te envio el link de donde puedes descargar el manual de usuario y manual de servicio de tu Technics BD-SL22 Espero te sirva Saludos Franco Dosil https://www.vinylengine.com/library/technics/sl-bd22.shtml

Hi Jan, there is a fuse that you should check, if it was burned, replace it only by one of equal size, never of greater value, it could be drastic The switch of your Technics, is electronic, works with a relay that connects the power to the main transformer This electronic ignition is powered from an auxiliary transformer (Stanby) If you hear a noise when you press the Power key, it means that the relay is working and you should check the fuse that tells you If you do not hear anything, the auxiliary transformer could be wrong I sent you the link of the service manual of the Technics SA-GX690, which is the same in this part of the circuit I hope you can solve the problem Greetings Hola Jan, hay un fusible que deberias revisar, si estuviera quemado, reemplazalo solamente por uno de igual medida, nunca de mayor valor, podr?a ser dr?stico El interruptor de tu Technics, es electr?nico, trabaja con un rele que conecta la alimentaci?n al transformador principal Este encendido electr?nico esta alimentado desde un transformador auxiliar (Stanby) Si escuchas un ruido cuando presionas la tecla de Power, quiere decir que el rele esta trabajando y deberias revisar el fusible que te comente Sino escuchas nada, podr?a estar mal el transformador auxiliar Te env?o el link del manual de servicio del Technics SA-GX690, que es igual en esta parte del circuito Espero puedas resolver el problema Saludos https://www.vintageshifi.com/repertoire-pdf/pdf/telecharge.php?pdf=Technics-SAGX-690-Owners-Manual.pdf https://www.vintageshifi.com/repertoire-pdf/pdf/telecharge.php?pdf=Technics-SAGX-690-Service-Manual.pdf

Hi Jan, there is a fuse that you should check, if it was burned, replace it only by one of equal size, never of greater value, it could be drastic The switch of your Technics, is electronic, works with a relay that connects the power to the main transformer This electronic ignition is powered from an auxiliary transformer (Stanby) If you hear a noise when you press the Power key, it means that the relay is working and you should check the fuse that tells you If you do not hear anything, the auxiliary transformer could be wrong I sent you the link of the service manual of the Technics SA-GX690, which is the same in this part of the circuit I hope you can solve the problem Greetings Franco Dosil Hola Jan, hay un fusible que deberias revisar, si estuviera quemado, reemplazalo solamente por uno de igual medida, nunca de mayor valor, podr?a ser dr?stico El interruptor de tu Technics, es electr?nico, trabaja con un rele que conecta la alimentaci?n al transformador principal Este encendido electr?nico esta alimentado desde un transformador auxiliar (Stanby) Si escuchas un ruido cuando presionas la tecla de Power, quiere decir que el rele esta trabajando y deberias revisar el fusible que te comente Sino escuchas nada, podr?a estar mal el transformador auxiliar Te env?o el link del manual de servicio del Technics SA-GX690, que es igual en esta parte del circuito Espero puedas resolver el problema Saludos Franco Dosil https://www.vintageshifi.com/repertoire-pdf/pdf/telecharge.php?pdf=Technics-SAGX-690-Service-Manual.pdf https://www.vintageshifi.com/repertoire-pdf/pdf/telecharge.php?pdf=Technics-SAGX-690-Owners-Manual.pdf

Hello Sergren, the indication of overload, can come for several reasons 1) The fan motor, outside resistive value is usually between 20 and 30 ohms, to measure it you must disconnect it from the circuit, if it is out of value you must replace it, it is very important that you get the same type of motor or fan assembly 2) The damaged output circuit, you can access the legs of the integrated power circuit RSN3305, taking off the lid that is in the base of the equipment, you must cut the grips that it brings, once the lid is removed, the legs of the integrated circuit are undone and remove it, then test the equipment that does not overload the display, if it does not appear the problem is in the output integrated and you must replace it Several offers of sale of this integrated appear in Internet, confirms that it is a new and original spare, there are many that offer spare parts of disarmament I sent you the link to download the SA-EX100 service manual I hope you can solve the problem Greetings Franco Dosil Hola Sergren, la indicaci?n de sobrecarga, puede venir por varios motivos 1)El motor del ventilador, fuera de valor resistivo habitualmente esta entre 20 y 30 ohm, para medirlo debes desconectarlo del circuito, si esta fuera de valor debes reemplazarlo, es muy importante que consigas el mismo tipo de motor o conjunto ventilador 2)El circuito de salida da?ado, puedes acceder a las patas del circuito integrado de potencia RSN3305, sacando la tapa que esta en la base del equipo, debes cortar los agarres que trae, una vez retirada la tapa, desuelda las patas del circuito integrado y ret?ralo, luego prueba el equipo que no se presente sobrecarga en el display, si no aparece el problema esta en el integrado de salida y debes reemplazarlo Aparecen en Internet varias ofertas de venta de este integrado, confirma que sea un repuesto nuevo y original, hay muchos que ofrecen repuestos de desarme Te env?o el link para que descargues el manual de servicio del SA-EX100 Espero que puedas resolver el problema Saludos Franco Dosil https://data2.manualslib.com/pdf3/69/6884/688325-technics/saex100.pdf?ac550d3bf2c5faf4d499661b57cadb92&take=binary

Hello Johnny, for what you comment, the noise Leo produces the Rec-Play key inside your RS-M7 Take out the lid and you'll find on the main plate, a long piece of metal, that on the Rec-Play key Use some contact cleaner or a couple of drops of DW-40 and apply them by one of the ends of the key, With the equipment off, put a cassette and press the keys Rec and Play, then Stop and repeat the sequence several times, you will see that the key moves a slide, where you put the cleaner Then connect again, turn on Play and it should work fine If not, consult a specialized technical service I hope I can solve the problem Greetings Franco Dosil Hola Johnny, por lo que comentas, el ruido leo produce la llave Rec-Play dentro de tu RS-M7 S?cale la tapa y vas a encontrar en la placa principal, una pieza met?lica larga, esa en la llave Rec-Play Utiliza alg?n limpiador de contactos o un par de gotas de DW-40 y aplicarlas por alguno de los extremos de la llave, Con el equipo apagado, pon un cassette y presiona las teclas Rec y Play, luego Stop y repites la secuencia varias veces, veras que en la llave se desplaza una corredera, donde haz puesto el limpiador Luego conecta nuevamente , prende pon Play y deber?a funcionar bien Sino es as?,consulta un servicio t?cnico especializado Espero pueda resolver el problema Saludos Franco Dosil

Hello Irena, check that the power cable is properly placed on the back of your Technics and also make sure that it is properly placed on the side of the power outlet, controls the outlet, works well, connecting a lamp, if it's OK, use it for the CD player if it keeps failing you, there you would have, a problem inside the device I suggest you look for a specialized technical service Greetings Franco Dosil Hola Irena, controla que el cable de corriente, se encuentre bien colocado el la parte posterior de tu Technics y tambi?n aseg?rate que se encuentre bien colocado del lado del toma corriente de energ?a, controla que el toma corriente, funcione bien, conect?ndole una lampara, si anda bien, ?salo para el reproductor de CD si te sigue fallando, ah? tendr?as, un problema dentro del aparato Te sugiero que busques un servicio t?cnico especializado Saludos Franco Dosil

Yes use correct cables which will be RCA phono plugs red and white. Easy to set up.

The fan assembly can be purchased from tritronicsinc,com (use the guest account) for $24.31 using part number SYE1128-4


Dan

if you open the panel look around for some blown fuses. be sure to unplug the receiver before and let it sit because there are two capacitors in there that hold a lethal charge of electricity. it could be a fuse but most likely its dead. probably a transformer or amp failure.