20 Most Recent
Xerox WorkCentre Pro 320/315 XL - Page 6 Questions & Answers
My monitor displays analog rgb then goes to blank black screen?
Here's some tricks I would try. Something here, might help...
1. Verify the monitor's power cord is plugged firmly into the wall outlet and the back of the monitor.
2. Verify the monitor cable is firmly connected to the computer and the monitor.
3. Verify that you have turned the monitor power switch on.
4. If the power light on the monitor is not on, test the wall outlet (plug in a light or something you know works).
5. If the power light on the monitor is not on, try a different power cord.
6. If the power light is on and yellow or orange or flashing, but nothing displays, or the display is incorrect, borrow a monitor from a friend. If that works, your monitor probably needs replaced.
7. Also, you could try your monitor on a friend's computer. If it doesn't work, your monitor probably needs replaced. If it works properly on your friends computer, the problem may be with your computers video output port, motherboard video chip (or video card, if you have one), or drivers.
Good luck.
Xerox 7132
You can find drivers for this and many other models at:
www.xerox.com/support
Enter the 7132 in the "Search or Choose" box.
Windows Vista 64 bit:
Limited Functionality PC driver support. This driver "should" work on most Windows 7 64 bit machines loaded locally, but it is NOT supported.
Windows Vista 32 bit:
Full Functionality Supported PC Driver limited to 32 bit Windows Vista or older operating systems.
Mac 10.5 or 10.6 ONLY.
Windows 7 ultimate activation
You can locate the product key on the bottom of the laptop, the side of the desktop, and or in the OEM/Retail Disc packaging. If you do not have either of the 3 you will have to purchase a full licesens of windows 7 ulimate. If you have the key, then go to goto my computer -> right click -> select properties -> scroll down to the activation panel--> input key
Format a xerox 250 hard drive
Sometimes you can format it on a windows or linux based machine to the correct format for the printer. You will have to find out which format it expects. If it says initializing for an extended period of time, it is most likely formatting it and you just have to wait. Make SURE you absolutely destroy the old hard drive completely. It contains copies of everything you have ever copied..
Copy problems with xerox fx docuprint c3290
Hi you can have a few problems. 1: try cleaning the glass on the scanner. 2. If you have auto document feeder there may be paper or dirt on the lens that the paper passes over. Clean the long lens. 3 if you clean the glass and lens and still have the problem you will most likely need to have it serviced as there may be paper stuck in the drums that the paper passes through. Paper follows a different path when copied versus a straight print. Try to see what path the copy paper is taking and clean it as best as possible. Last trick is to take out toner cartridges and wipe them clean. Shake them forward to back and reinsert. You may have a worn out roller and if this is the case it is usually cheaper to just buy a new printer.
Replacement drivers for the Phaser 7500
The print drive for this printer is horrible, and causes functunal print issues. The best and simplest work around for this is to not use the phaser 7500 driver. Answer coming next . . . Use the Okidata C9500 print driver. It works perfectly for the Phaser 7500. Now you know how to make it print properly
Where can I find help for my TOSHIBA NOTEBOOK
Did you mean the FONT size or the TYPE, If so this can be reduced by choosing the TOOLS option in the window - option bar and it can be reduced to your type. I hope this was what you meant?
I need to format a
you would either format or delete all of the data from this drive if it has an operating system on it you would format it
you have to format your hard drive using a third party disc to erase everything on your hard drive
During the boot process you will see on the screen to press a certain key to enter setup
Press and hold that key during the boot up process to enter BIOS the scroll to advanced bios features press enter change your first boot device to cd,press escape then press f10 to save to cmos restart
note this will erase you operating system you will have to have an operating system disk to load it onto you hard drive or create a partition to load another operating system
note after you have loaded the operating system you should go back and change the first boot device to your hard drive
The BIOS is AMI. Under ADVANCED SETUP: The options listed for 1st,2nd ,3rd Boot device include:IDE0 means Pri master IDE1 means Pri slave IDE2 means Sec master IDE3 means Sec slave
or if you are using a USB
insert your usb drive
click start right click on my computer select open you should see your USB drive
right click then select format
another way is to control panel administrive tools,computer management disk management right click on your drive select format
hope this helps
www.WipeDrive.com
Where is the hard drive
The hard drive, IN WHAT?
What are you working with?. In other words, is this a desktop, a laptop, a motor vehicle?
Not finding what you are looking for?