Top 20 Check Point Network Adapter Questions & Answers

The Bunker Hill safe is distributed exclusively by Harbor Freight. You can try contacting them directly here: Customer Service Otherwise you may need to build your own bushing.

Try banging on the top of safe with hand, rubber hammer, regular hammer with board on safe to spread the energy, etc. while turning the knob at the same time. Sounds silly but worked for me. Sellingdj......

Find the one on thi s page anc click on it to take you to the web page. exploded view 1998 hiace clutch and bellhousing

Maybe this could help? http://wiki.answers.com/Q/How_do_you_replace_Toyota_clutch_slave_cylinder

Is it a turn dial an electronic key pad or some other type? If its a keypad then its probably a bad contact under one of the buttons.

If you can get the door open.

There is a reset button on the hinge side of the inside of the door.

Press the reset button, and then you have about five seconds to enter your new code.

Test the code with the door open!

That way, if it does not work the first time, then the doors is still open, and you can do it again.

Warning: Place fresh batteries into the battery compartment before doing this, or you will just get locked out again.

If, you cannot get the door open, and your keys are locked in the safe, then call Harbor Freight.

Call Harbor Freight: Technical & Parts (Safe Keys) 1-800-444-3353Give them the key code number. (it is located on the key insert, where you stick the key in the lock) It takes about two weeks to get a new key/keys.

Call Harbor Freight: Technical & Parts (Safe Keys) 1-800-444-3353Give them the key code number. (it is located on the key insert, where you stick the key in the lock) It takes about two weeks to get a new key/keys.

Call Harbor Freight: Technical & Parts (Safe Keys) 1-800-444-3353

Give them the key code number. (it is located on the key insert, where you stick the key in the lock)

It takes about two weeks to get a new key/keys.

Look for a forum for game help. This site is for hardware and software problems, not to assist your gaming experience. That is what the gaming forums are for.

Can't tell, as you don't say what the make and model of your router or network adaptor is.

Can you post the adapter brand/model and your OS.Tks!

I had the same problem.

Call Harbor Freight Customer Service @ 1-800-444-3353

Before you call the number though, go to your safe and write down the three or four digit key code, that is on the silver key slot. (they will need that number)

It is something like $8.00 per key, plus shipping, and it will take about 2-3 weeks to get it, but they will mail you the keys in a small brown envelope.

Good Luck!

Let me know if this helps you....internal component exploded view:the case and related parts exploded view:the channel plate exploded view:the PArking Pawl, and related parts exploded view:the gear train exploded view:

Change batteries ASAP because if your batteries die you will be unable to get into the safe without the key. The batteries are located inside the safe. If you can't open the safe, you can't replace the batteries!!! There are NO replacement keys available for model #45891. We've tried. I would NOT buy this safe again for these reasons.!!!

standard brinks opening format is " insert key, press *symbol, enter your code, press #symbol, turn key within 3 seconds. Best wishes!

I have the Executive 95824. The handle is locking up on me. Almost seems like it needs WD40 or something. The 3 main bolts do not come out all the way now. Any tips on how to fix this?

Take it to a locksmith, to try to unlock it, or to a welder, to cut open a corner, so that the keys will slide out. Then, buy a new safe.

Remove the sticker on the front panel with the SKU number, behind it will be a small hole, use a small screwdriver to remove the screw, then carefully remove the number pad. You will see the place to use your key.

Hello,

If you cannot remember the code and the box is locked, there is supposed to be a manual override key hidden somewhere on the safe.

If you can get into the safe, all you do is press the black reset button on the inside of the door, then enter the combination of choice, followed by the # sign.

But if you cannot get into the safe and you can't also find the manual, then I would suggest you contact Brinks vial e-mail or phone. They should certainly have the solution to fix this problem.

To contact brinks, visit this link; http://www.brinksinc.com/Contact-Brinks/Contact-Brinks.aspx

But you would have to prove that you are the owner to them.

I hope you understand the above.

Good luck.

Hi f this is the correct solution for your safe, and not a obsbox-so-plus-us_1 network adaptor please follow these instructions, your safe should come with a pre-set number with the default code of "159-A".To change the code, first open the safe. On the inside of the door near the hinge,
there is a small red "reset" button press this button until the Yellow LED on the front panel lights up Now input your new code, one that you can remember this can be up to 8 characters, then followed by either "A" or "B". The Yellow LED will flash to indicate that your new code has been
accepted. If however the Yellow LED does not flash, the code has not been accepted, and you must start over test your new combination before closing the door also make sure to have the Override Key available when setting a new combination or changing batteries, in case the door doesn't open again with the new set code...hope this helps.