20 Most Recent La Crosse LaCrosse Atomic Digital Wall Clock with Wireless Temperature Sensor - Page 3 Questions & Answers

in the clock set mode change from 24 to 12

http://www.lacrossetechnology.com/media/catalog/product/w/s/ws-9611u-it.pdf Here is the method used to set up the outdoor transmitter with the base station

The manual for the thermometer is available on the LaCrosse site: http://www.lacrossetechnology.com/7034twcit/index.php . The direct link is http://www.lacrossetechnology.com/7034twcit/manual.pdf .

Put the batteries in the remote(s) first. (If you need to reset the units, pull the batteries from the indoor temperature sensor and the remotes for 10 minutes before restarting.) With the remotes and indoor sensor 3 to 5 feet apart, put the batteries in the indoor temperature sensor. Then wait 10 minutes before pressing any buttons. Once you have confirmed communication between the units, then move the remotes to their final location (not more than 330 feet away minus 30 feet for external walls or windows and 20 feet for each internal wall between the units.)

I hope this helps.

Cindy Wells

You have to set these, if you don't have a manual you can usually obtain one on line or contact La Crosse

It means OverFLow - the display unit can read from -39.8°F to 139.8 °F and it is getting a signal from the sending unit that is lower than -39.8 or higher than 139.8. This happens when the sending unit goes haywire (or, not likely, when temperature out doors is REALLY lower or higher than the range). Replace the sending unit. If you really like the product, I suggest you buy another of the same model. It will come with a new sending unit and that will be read by both of the displays if they are within 80 ft of the sending unit. Good luck.

You may download a copy of the manual at http://www.lacrossetechnology.com/9047itc/manual.pdf It's a PDF file so your viewer should be able to magnify it to just about any size you want.

http://www.manualslib.com/products/La-Crosse-Ws-8256u-2940322.html Hi Vickie....try this....good luck to you. Regards, Dennis