Top 20 La Crosse LaCrosse Technology Professional Weather Station - Page 5 Questions & Answers

ask your phone company

It is a known issue Try first a general reset: - remove the batteries from the clock (thus turning it Off.) - remove the batteries from the outside sensor (if you are not aware that it has batteries, then perhaps it is not working because the batteries are no good any more! check that also.) - wait 10 minutes with no power to the device. - put batteries back in, power On again. - hit Reset. - hit Receive button. - change the channel for reception from the outside sensor. - change the channel on the outside sensor to match that channel. - then set the time once more, once the remote temperature is sensed once again. If this does not get the outside temperature reading working again, you may have to replace that temperature sensor. https://www.google.com/search?q=Model+spc373 ..

It is a wired system (outside unit to the indoor phone) and only available in South Africa. This seems to be the distributor and there is no manual online. The are far better systems with colour video, audio and wifi or bluetooth. https://www.game.co.za/game-za/en/All-Game-Categories/DIY-%26-Auto/Home-Security/Intercoms-%26-Alarms/Alarms-%26-Sensors/Digitech-Wired-Door-Phone-BPSDP3206A/p/504101-EA ..

Try removing all batteries, then reinstalling in the outdoor unit and waiting for it to start sending data before reinstalling batteries in the indoor unit. If you don't see data displayed on the indoor unit, the outdoor unit may have failed.

From : ebay.com amazone.com

Reset display by pressing the RESET button, located on the back of the display unit inside the battery compartment. Date and time will need to be entered after a reset. Flashing of the outdoor temperature is generally an indication of wireless interference. https://www.acurite.com/media/manuals/00754-instructions.pdf Hard Reset:

1. Bring both the sensor and display unit together and power down by removing at least one battery from each and/or removing the power cord.
2. Make sure the A-B-C switch on both units matches. ...
3. Reinstall the battery in the outdoor sensor.
4. Reinstall batteries and/or power cord into the display unit

https://support.acurite.com/hc/en-us/articles/360013641694-3-in-1-Reset

https://www.fixya.com/support/t27146955-error_07_means_conlog_prepaid_meterhttps://www.genguide.com.ng/a-complete-review-on-conlog-prepaid-meter/

1 https://images.homedepot-static.com/catalog/pdfimages/c6/c6dfd8a3-256c-4785-a1b5-f845723b06e2.pdf

Take it apart and get some isopropyl alcohol and a q-tip. check for corrosion around the terminals. If there is none, look for loose connections. If there is something loose, check if a bit of the board is loose. If a bit of the board is stuck to the terminals, give up on batteries.

https://support.acurite.com/hc/en-us/articles/360007555574-Temperature-is-Flashing-Stuck-or-Showing-Dashes-on-a-Basic-Multi-Sensor-Display-

Those are precision devices and require factory check up and calibration at regular intervals. Contact your dealer.

FIXYA doesnt sell products check manufacturer or online

Have you changed the batteries in the outdoor module?

Have you changed the batteries in the outdoor temperature sensor?

Try changing the batteries in the outdoor sensor.

Give details about the clock. Is it mechanical or electronic?

They are advertised as 50 foot range, but the accuracy starts falling off past about 35 feet

Hold the CLK button, and then the ADJ button. https://fccid.io/OWF-WSRX/Users-Manual/Users-Manual-171217

Hi, all electronic rotary laser levelers have an electronic calibration that you can do yourself, you just need to know the correct algorithm to control the buttons. Look here (https://laslev.com/reviews-laser-levels/firecore/automatic-rotary-laser-level-firecore-fre207r-servo/) for an example of this unit, it describes the entire calibration algorithm for the X-axis and the Y-axis. The buttons may be slightly different, but the principle is the same, I'm sure you can do it, there's nothing complicated there.

Have you changed the batteries in the outdoor temperature sensor?