Korg X5d - Answered Questions & Fixed issues
How to save x5d sounds in laptop
Hi,
if you do not already use a midi sequencing software try "Bome's SendFX". After installing, go to X5D menu 04A MIDI DUMP, choose data you want do dump (e.g. "all"). Make sure, that no SYSEX FIlter is active while working with a sequencing software.
After transmission, you can save the "yoursounds.mid" file and send it back to the X5D later.
Good luck!
4/20/2014 12:15:55 PM •
Korg X5d
•
Answered
on Apr 20, 2014
•
329 views
My korg x5d doensn't show bank A anymore. Instead of A01 - pipedreams lcd screen shows blinking A01 and InitProg01???
You can try this.STEP 1:Set Program protect and Combi Protect to OFF.- GLOBAL- Using PAGE+ or PAGE-, find untill the display show "3A-MEMORY PROTECT". Set the parameter to OFF by using YES or NO button.STEP 2:Data Load.- GLOBAL.- Using PAGE+ or PAGE-, find untill the display show "05A-PRESET DATA". Change ALL to PRG (your case). Use Left/Right Arrow button to moving cursor. Choose "PRE-a" (your case). Move cursor to "OK?". Press YES when "OK" blinking for confirm. Exit (Go to PROG button).
12/19/2017 8:05:57 AM •
Korg X5d
•
Answered
on Dec 19, 2017
•
613 views
KOrg X5D is out of tune
Did you try to get to Global mode, and then check if the tune is 440 hz? Check the Global Settings. The tuning might either be altered or the key transposed..
12/10/2021 12:36:45 PM •
Korg X5d
•
Answered
on Dec 10, 2021
•
895 views
Hello my Korg X5D on switching on shows
There's a watch type battery (flat disc) on one of the boards inside the X5D. This maintains the settings while the keyboard is switched off and could be the whole problem. The keys are on two different circuit boards connected with a multi-pin cable. If the cable were dislodged I would expect it to simply cut off half the keys but it's probably worth checking.
11/20/2011 8:32:25 AM •
Korg X5d
•
Answered
on Nov 20, 2011
•
501 views
How to turn on en
For Combi/Multi patches you can disable control changes for each sound under EDIT 6D but this also switches off other control change instructions (pan, expression, pedal etc.).
Somewhere under GLOBAL settings you should be able to find the modulation wheel Depth setting and set it to 0 which should stop your mod wheel from working but you could achieve the same effect by just keeping the mod wheel pulled all the way down.
7/28/2011 8:22:29 AM •
Korg X5d
•
Answered
on Jul 28, 2011
•
226 views
Hi, my korg X5D have
You can't always believe the display in regard to the model... Try finding the revision level display that will tell you what you have... It is NOT likely a seller would strip a X5D case to try to fool you.
Find what the difference is in the model and test your unit for that feature.
6/12/2011 5:46:19 AM •
Korg X5d
•
Answered
on Jun 12, 2011
•
526 views
1 key(F)sound's louder than all
Each key has two contacts which close at different times as a key is pressed which is how key velocity is measured. The failing key has one contact that isn't making resulting in the velocity is measured at max velocity so it is LOUD.
You need to clean the contacts which are usually conductive rubber pills pressed against circuit traces on a circuit board under the keys. The contacts should be cleaned using 99% isoprophyl alcohol and Q Tips.
3/8/2011 9:16:52 PM •
Korg X5d
•
Answered
on Mar 08, 2011
•
596 views
My korgx5d is not working
The power adapter may be failing... make sure you have the correct one. It sounds like the power may be marginal and when you start loading it including the sustain it gives out...More than this would be a very serious problem that would not have a DIY fix.
2/9/2011 6:02:09 PM •
Korg X5d
•
Answered
on Feb 09, 2011
•
267 views
Keyboard seems to be stuck
On page 105 of your X5D manual, read up about "transpose". Setting the transpose shifts the notes plus or minus from the normal.
If you don't have a manual, you can download one for free.
11/14/2010 3:58:36 PM •
Korg X5d
•
Answered
on Nov 14, 2010
•
306 views
Not finding what you are looking for?
