20 Most Recent Bandai Stylin' Button Designer Questions & Answers

Do you still need the instructions? Can give you the sheet! Please let me know! Regards

I think everything up to step 12 should be pretty self explanatory.
Steps 13 and up are below
13 - Initial ramp
Cut two pieces of wire into 150 cm (59 inches) lengths (may need to be trimmed down once put on track)
Connect one end of each piece to J-3 then thread through the following order
G-7, D-4, C-5, F-6, H-4, I-4
Connect to track separator piece (the piece with the flipper)
14 - Track A (Loop)
Cut two pieces of 270 cm (106 inches) lengths (again, may need to be trimmed down once put on track)
Connect one end to the side nearest G then thread through the following order
E-3, D-1, D-2, C-1, C-2, A-1, B-1, E-2, G-2, I-1, H-1, F-1, E-1, G-1, J-1

Where can i find spacewarp 10000 english instructions.

make sure the squid is not lodged with water. you can blow the water out. fill a bottle entirely with water. plop in the squid. squeeze the bottle slightly to make it sink down, squeeze it a few times in succession it will spin and dance. as long as there is an air bubble and it is not filled with water it will rest at the top.

I was able to find you this website with all kinds of great craft kits for pre-kindergarteners.

Sounds like you are missing the central support rod or bar that connects the Babyweaver swinging crib to the stand, providing stability and support for the crib. This component is crucial for maintaining the structural integrity of the crib and ensuring safe usage. Here are some steps you can take to address the missing part: 1. Contact the Manufacturer: - Reach out to Babyweaver or the manufacturer of the swinging crib to inquire about obtaining a replacement central support rod. - Provide them with details about the missing part and the specific model of the swinging crib to ensure you receive the correct component. 2. Check for Spare Parts: - Check if the swinging crib came with a user manual or assembly instructions that may have information about spare parts or replacement components. - Look for any contact information provided for customer support or spare parts inquiries. 3. Online Search: - Conduct an online search using keywords such as "Babyweaver swinging crib central support rod" or "Babyweaver crib replacement parts" to see if you can find the specific part for purchase. - Explore baby product retailers, online marketplaces, and specialty stores that offer replacement parts for nursery furniture. 4. Local Retailers: - Visit local baby product stores or furniture stores that carry nursery items. - Bring the existing part (if you have one side of the support rod) to help them identify and match the missing component. 5. Custom Fabrication: - If you are unable to find a suitable replacement part, consider contacting a metal fabrication shop or a carpenter who may be able to custom-make a central support rod that fits your Babyweaver swinging crib. - Provide them with measurements and details about the required specifications for the part.