Top 20 Fisher Price FisherPrice Fisher Price Digital Arts and Crafts Studio Questions & Answers

For Software updates visit the product page and register for updates.
for fresh copy, call customer care and request for the same

sorry have no need to work on toys no small ones anymore

try to reset, insert small thin object with the batteries in and the product turned on. And check that batteries are both the same bransd and heading in the right direction and use the recommend type or brand if they have one.

notify fisher price https://fisher-price.mattel.com/shop

As we can not fully see the damage my best bet would be to take it to a local "Mens Shed" where I'm sure they can fix it for you.

Contact seller support

Try to put it new batteries. If not notify the person you bought it from or the store and ask for help or refund.

its broke buy a new one

Sorry we have no parts locator service here.

Has anyone been using anything beside the stylus your suppose to use? Cause that can damage the screen and make it not come on. Also i seen you said it won't recognize when hooking it up to computer. Make sure the program is installed on your computer and then unhook the cords from device and computer and reinsert them. Let me know what happens.

hi Patty. i have looked all over the internet just for the parts you are asking for but can not find anything. but you could go to this link and see if its any good to you. if not have you tried ebay?. where to buy eggs and veggies for the Fisher Price laugh and Learn Farm...

If you put each figure in two socks and tossed it in the dryer, the socks should protect them from the tumble. I just don't know how long to keep them in the dryer. They might deform if left too long. Once deformed, there is no fix. I imagine a similar effect achievable with a hair dryer, though a lot more tedious.

no contact the manufacturer direct for spare parts

my grandsons broke their mother's (and aunts') FP music box. There was almost no sound The teeth are simply a wind-up music box set, connected to a rod that transmits the vibrations to the diaphragm under the pseudo-tone-arm. I was able to fix by placing a cotter-pin on the rod in the arm at or near the junction and then trim with wire cutters to the correct size. I checked the diaphragm first by tapping it through the arm/table connection.

How to assemble: Steps: Mechanism casing upside down: - insert man - insert on/off switch - insert small cover - insert small gear - insert H shaped part at the gear opening - align base and screws in w 2 screws Right side up: - attach big gear and axel to small gear inside casing - place scoring under axel and onto the base - align merri go round against mechanism and 2 screws Upside down: - screws 3 more screws of merry go round piece

try toys-r-us or toyworld

Try searching on eBay. There's all sorts of information there. You don't have to buy anything. eBayeBay

Hi jaque, It will depend on whether you have two spare input ports

Slide the metal bar sideways out from its little nook, then wiggle the bar out of the numbered fabric strip. You can move the bar up into the numbers 2 or 3 to shorten it. The metal bar can be hard to move, so if it's feeling stiff you might need a small wrench to clamp on and move it.

It's probably just an AV cable able to be purchased online at Amazon.com