20 Most Recent Goldstar GVR-E235 VHS VCR Questions & Answers

Generally I would say yes. But you can get universal remotes that are cheaper than buying the original, that will do the job.

In the setup menu there will be a screen that lets you change from <AIR> to <CABLE>. When that is done, do an automatic channel setting or programming. That should do it. If you have trouble leave a comment and I'll follow up.

RESISTOR 39 k? 0.125W

Does this manual works for you? http://www.manualslib.com/manual/61538/Goldstar-Gbv441.html

Have a look at the Goldstar website, they might have a free PDF of the manual.

The TV channel should be set on Chanel 3 or Chanel 4. Use the remote control of the TV to set it. You can also use the AUX ports (to TV) on the VCR and connect the three wires to the AUX ports on the TV (TV input). The two audio wires are to be connected to Audio in and the Video signal to the Video input. If you get a garbled picture you can use press the tracking button on the VCR. Usually you press the Channel Up arrow, or Channel Down arrow to adjust the picture.

hi,

how many years, your tv is working .

if over 10-15 years you must try to replace with new one.

if not :

the gun of screen lamp may be damaged or one of diod is damaged or one of the larg capacitor

is leeked .

anyway for solving the matter a technecian must visit your tv.


good luck

gorbesia