LG M2362D 23 in. LCD TV - Answered Questions & Fixed issues

Check the remote control for its infrared emission. Check it with fresh batteries. Check it by pressing all the keys. You can detect the presence of infra-red emission from the remote control, using a cell-phone camera. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. In some cases, the remote control might need to clean. https://electronicshelponline.blogspot.com/ https://homenol.blogspot.com/ https://remotesearch.blogspot.com/ Search the site by type in this key phrase "how to test a remote control "in the "search box at the top right of the display window of the Homepage" to get the related post quickly. https://youtu.be/wUpnETSm6_k https://www.youtube.com/watch?v=jsSCNCW3IbQ [open and clean] https://www.youtube.com/watch?v=Qp-l1uh-5gE [open and clean]

The remote instructions show codes to use to set-up the remote. There is an extensive number of these codes and usually indexed according to TV's identity. It is easily done with that list provided by the remote manufacturer. Check their website, perhaps there is a PDF of the user guide with the codes.

Sounds like it is displaying the firmware version because it is being started from applying power rather than pressing the On/Off button.

two possibilities 1.Power supply unit problem 2. lcd -lamp problem either ways for this model advanced help is needed

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power led, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. Viewing it in "Mosaic" will make surf easy. http://electronicshelponline.blogspot.com/ Blinking codes details to many popular brand TVs are given. Surf the site with patience.

Refer its user manual for details. Gopakumar Gopalan Google

I happened the same problem and the solution must change the power pack

get someone that knows what they are doing and see if someone lives near you and see if they can come over to your house that is technology person and fix it.

Almost certain to be the screen inverter pcb locking up and going into protect mode Flea bay has lots of them relatively cheap and it's a straight plug in swap for the old one.

If I understand you correctly u can occasionally get the tv out of standby using the remote but seldomly if ever using the tv mounted controls . This being the case I would suggest the capacitors on the output stage of your TVs power supply and starting to fail giving you low voltage and keeping the set in standby its a very comin fault on SMPS's

If you can hear sound, then screen is gone.I'll bet you don't.If you see an image, hear sound, just won't hold.I'd bet on the T-Con board.Not knowing what is really happening here..If willing to dive into electronic's.Open her up and start testing power side, starting with capacitors.

I got the same problem and i raged a lot ! But now it's better, so you should take your telecomand ant try all buttons and it will turn on again ( sorry for my bad english i'm french and i'm 14 ) yours faithfuly ;)

try to replace sound board or sound IC

The tv have a long board that called the tv LCD inverter board,this tv LCD inverter board only job are to control and help the all the amount of the tv LCD screen panel backlight brightness for the tv LCD screen panel for light.This long LCD inverter is the causes and the problems.New tv exchange it for another one,not so new take ur tv warrenty repair qickly the tv long LCD inverter board it is the causes an the problems must have to be change.

Check the monitor cord to the PC, tighten them as also check the mother board for any loose connections. If possible try with an another monitor to confirm that the fault is with the monitor or not. If so open the monitor after disconnection of mains and solder all the suspected joints , seen to look dry. Check for loose components, capacitors, IC or resistor that detach the soldering connection when it is hot.

Check the remote control for its infrared emission. Check it with fresh batteries. Check and clean the battery contacts inside the battery comparment, for any rust or dust accululated, prevents proper battery connection. Clean it well, berofe inserting batteries. If you are using a universal remote control, you have to set it up with the set-up code to your TV brand, otherwise it won't work properly. If you wish to get more details, http://electro-medical.blogspot.com/ http://electrohelponline.blogspot.com/

Clean the Lens: Use a DVD cleaning disc to clean the lens. If the problem persists, consider professional cleaning. Test Other Discs: Try playing different DVDs to see if the issue occurs consistently. If it's specific to one disc, that disc might be the problem. Check for Updates: Make sure your DVD player's firmware is updated. Refer to the manufacturer's instructions for firmware updates. Try a Different TV: Connect your DVD player to a different TV to see if the noise disappears. If it does, the issue might be with your TV. The hum is simply the player trying to read the disc. It can't so, it spits it out. Remember that prolonged use of a malfunctioning DVD player could potentially cause damage. If the problem persists, consider seeking professional repair or replacement

Question edited for clarity. It appears to be an LG rather an an IG. https://www.avforums.com/threads/lg-42lb1db-how-cani-remove-the-swivel-base.519459/ Further Help and videos https://www.google.com/search?q=lg+42lb5df+remove+base+stand ..

The screen blank out

Likely a dry connection where the HDMI socket it soldered to the board. https://www.google.com/search?q=LG+PLASMA+TV+MODEL+NO.60PS60-UA+that+is+not+picking+up+the+HDMI Old plasma technology though, time for a new one, as quality has moved on. https://reviewed.usatoday.com/televisions/content/lg-60ps60-plasma-hdtv-first-impressions-review-830 ..