20 Most Recent Mitsubishi VS-60603 60" Rear Projection Television - Page 3 Questions & Answers

also a color wheel that has gone out ..replace it.

click the link http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm

The Dish receiver may have a volume function that is causing the problem. Use the Dish remote to increase the volume and see what happens.

I own a Mitsubishi WS-55807 55 in. for parts if you are interested. Please contact me back if interested. 727-773-8208 Nicole

need a main control board for a mitsubishi vs60603 3-1999

Mouser electronics

Give them a call and give the information. They will have a replacment.

you need a repair man to come out

Just bought a new remote for my VS60603, then main board goes bad upon moving to new location. Never used it. Interested in purchasing it? Email [email protected].

try switching your pip to the main screen and see if the pip shows blue while the main screen works.

the light bulb has gone out....

actualy the only wat to reset is to unplug the power cord for 1 minute the plug it back in.

No the VS45603 is a standard TV not HD

Which board are you looking for? I can probably help ypu out.

Is the TV about 2 yrs old. Either the bulb is burnt out or there are capacitors in thr power supply that need to be replaced.

If you have the owner's guide the answer is on page 105. You must have the original remote that came with the TV, If you have the remote but not the owner's guide then e-mail me at durango146 and I will send you the instructions. Dodger 1

I don't know where you live but Dave at Sy Electronics (480-917-8889) in Arizona knows how to fix Mitsubishi Tv's. If you have been told by your local TV repail place that parts are no longer available don't believe them. Call every repair place in town until you find a comptent and knowledgeable tech. That is what I did. Roger

its about 3/4 of the way up that board on the left hand side its the vertical output ic mounted to a aluminum heat sink

yes there are 3 fuses all located on the main board which is the board on the right where the power cord is entering the set one fuse is near the cord the other ones are in the center of the board.

After about a week I got it to turn on but still no picture just a white beam about 2/4 down on the screen and still has sound