20 Most Recent RCA RP5012 Digital Voice Recorder - Page 8 Questions & Answers


If code search doesn't work, you may have to try a different URC. All URCs do not contain all possible codes.

RCA Audio... | Answered on May 31, 2018


I love the form of your question, as I wanted to wing the sucker myself, but got online before I actually pulled an Office Space on it. I found nothing, but I DID actually figure it out. Not super intuitive though. To set the time: Hold down the memory key in the middle until the number flashes. Use the arrow up/down on the right to set hour. Press Memory key again, repeat with arrow keys to set minutes. Hit memory key again. Alarm: Press/hold the Alarm button until the Alarm 1 or 2 flashes and press the side you want, 1 or 2, to set. Arrow time up/down, then do minutes, press alarm 1 again, select alarm or tuner, press alarm 1 again. Now I need to see if it will work in the morning. I know the flipping time is set though! Good luck. If you wing it, please post photos! :D

RCA Audio... | Answered on May 24, 2018


Try Googling (rca)(rv-9970a)(manual)

RCA Audio... | Answered on May 22, 2018


First, I'm not a Pyle tech. But back in the day I used to be an audio freak (1970's 4 channel all-the-way!)
* I tried to get the exact specs on your receiver but I suspect it's a non-amplified output. RCA jacks almost never have a high level output. (yes, the old 1940-60's used RCA jacks for speaker high level output. But you have a late model receiver.) Most likely you need a separate amp to power the sub woofer (unless it has it's own power amps.) You may still use another audio amplifier if you have a spare (mono or stereo won't mater as you only use one channel) but be aware that low frequency use way more power than normal frequencies (600 to 3KHz) The low end (50 to 300 Hz) will burn out any speaker and amp as the lower the frequency it's like hooking up a car battery directly to the speaker! If you have an old style vinyl record player that's playing a warped record. watch the speaker flap around to the wave of the record. Need to turn on the 50 Hz cancel out button to prevent speaker blowout!
* This link is still for a powered woofer. It looks like the same PD3000 receiver as yours though I can't be sure:
https://www.youtube.com/watch?v=OXEtib5OnGI

* This is an external "Powered" sub woofer (powered amp and additional cross over "filter" to extract just the lower frequencies. The following you tube link is a detailed example of how this type of system works:
https://www.youtube.com/watch?v=ZpSAQDjuWN0

Aloha, ukeboy57

RCA Audio... | Answered on May 11, 2018


RCA or Phono type plugs only have a single pin plus ground and so one plug and lead assembly is needed for each channel..

It is important to match the output of the tuner to the input of the amplifier. This is easy if the amp has a dedicated tuner input but if it hasn't it is best to study the instructions, though at a push the line-in or auxiliary input might provide satisfactory reproduction.

RCA Audio... | Answered on Apr 30, 2018


I had a brief look at the spec and it says the speaker outputs are banana sockets/plugs.
Once the four speakers are connected, or two with the fader control adjusted, it should produce good sound and if it does the next stage will be to connect the subwoofer with RCA plugs into the dedicated outputs.

I suggest you reread the manual.

RCA Audio... | Answered on Apr 28, 2018

Not finding what you are looking for?
RCA RP5012 Digital Voice Recorder Logo

45 questions posted

Ask a Question

Usually answered in minutes!

Top RCA Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76140 Answers

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6031 Answers

Are you a RCA Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

RCA Audio Players & Recorders

  • RCA Audio Players & Recorders

Most Popular Question

recover

  • Audio Players & Recorders
Loading...