20 Most Recent RCA RP5012 Digital Voice Recorder - Page 5 Questions & Answers


That is an odd thing, CD player don't really need manuals for anything but fixing one, and even that is something nobody does. So either you have a problem with the CD player that you did not mention, or you lack some basic common sense that would help you load the 3 CD's ,and play them. I'm not sure what the problem really is because you did not say. Try stating what the problem is? Manuals, in many cases, can be got by searching Google for them.

RCA Audio... | Answered on Dec 24, 2018


NO THAT WILL GET YOU NOTHING

RCA Audio... | Answered on Dec 09, 2018


If you are speaking about the wires to the speakers from the player, you can get any speaker wire the common sizes are 14 or 16, pay attention to the positive and negative or it will sound muddy.

RCA Audio... | Answered on Dec 08, 2018


Google (rca)(model)(manual) without parens for instructions. Note: 6124CG is not the model.

RCA Audio... | Answered on Dec 08, 2018


Google (rca)(rcd160)(manual) without parens.

RCA Audio... | Answered on Dec 06, 2018


a RCA connector is a complete piece, the RCA jack is a complete unit. You should use a RCA phono cable. You can try it ans see if it works, it is your unit.

RCA Audio... | Answered on Dec 04, 2018


The EQ is made to go between two devices such as a preamplifier then to the EQ then to your receiver or TV to EQ then to your receiver, depending on what you are trying to do. This is how you hook it up. TV line out goes to EQ line in. EQ line out goes to receiver line in. The receiver is then selected to use line in by a push button on your receiver or by other means that says line in to select that as your source from the front receiver panel. The red rca line cable is for the right side and the white is your left side of the audio. your receiver now can hook to the speakers and you have control of the volume up and down from your receiver. Now if you are going to go from your receiver to a high powered amplifier then the line out on your receiver would go to the line in on the EQ and the line out on the EQ would go to the amplifier line in. The amplifier would have to be able to control the volume up and down as line in and line out volumes are fixed. Record output jack is for recording where the jack goes to a recording device line input. The play is the recorder line out that plugs into that jack. Ignore those two jacks for your purpose.

RCA Audio... | Answered on Nov 15, 2018


Sometimes it just needs to be grounded. Look for a grounding wire and attach it to a grounded source. Unplug it and the plug it in again after grounding. My turntable goes through this same hum at times and usually it is just that the grounding wire came loose. You can try pushing the wire into the ground in the wall receptacle as well but be careful that you only insert it into the ground portion.

RCA Audio... | Answered on Nov 05, 2018


Request the schematic diagram for model RS2050 directly from RCA.

RCA Audio... | Answered on Nov 05, 2018

Not finding what you are looking for?
RCA RP5012 Digital Voice Recorder Logo

45 questions posted

Ask a Question

Usually answered in minutes!

Top RCA Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76140 Answers

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6029 Answers

Are you a RCA Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

RCA Audio Players & Recorders

  • RCA Audio Players & Recorders

Most Popular Question

recover

  • Audio Players & Recorders
Loading...