20 Most Recent Fisher Price Kid Tough DVD Player Questions & Answers

Hi,
Welcome to Fixya. If every disk shows you an error you can try to use a cd lens cleaner and see if it will fix the issue. If this does not work it only means that lens or the laser of the DVD is bad. In thast case you can check the warranty of the system so that you can have it check and repair for free.
Thanks

Hi, these Fisher Price toys are quite well made, however even so the quality of the electronics isn't too good, and usually these units either fail in the area of the power supply, and as soon a a "Load" is placed upon it, say attempting to "Play" it "Overloads" and shuts down. Now it is either this or the DVD head and laser assembly have faulted, usually a thing called the quadrant detector fails in one of the four corners and stops the device from working.

I doubt that this will be an economic repair, as parts and labor would most likely equal or exceed the cost of a new one?

However if you do wish it repaired usually one must send it back to FP, BTW they are very reasonable in these repairs too. First you must contact them and ask what where and when, and go from there.

Hello Steph,
First off, my name is Marc, and I am from New Jersey. If by any chance you live anywhere close to me, and still need your dvd player fixed, I can personally fix this item without any hassle. (Depending on the specific issue you are having)
First, I must ask a couple questions of you...

• When did you purchase this item?

If the date of purchase is within 1 year, you should call Fisher Price's customer service directly (1-800-747-8697). The number is toll-free and they are open everyday from 7 a.m. - 10 p.m. (Central Time)
If you are, then call them... I know for a fact that in cases like these, they are normally very good with these issues, and will offer you a no hassle refund.

• Also, what is the exact issue are you having?

This is important for me to know, just because I have successfully repaired two of these devices. One repair was to fix the issue with failing to read the disc properly, and the other was a battery/power supply issue. If the problem you are having with this device does not match either of these, then please be quite detailed about the troubles you are having.
If need be, please feel free to contact me day or night at [email protected]. Otherwise, I wish you the best.
Sincerely, Marc C.

I have found the PDF instructions for the same model but it is blue. I think the color is the only difference. Try the instructions and see if they are what you need. Mattel Support DVD player Blue. There are three PDF files for this DVD player see all three.

I'm not sure which light you are referring to but my daughters dvd player blinks on the side right by the brightness controls when it is charging.

The most obvious reason is an overheating issue in the Power Supply board. There are other ideas here, but you need to take it to a television engineer to diagnose https://www.google.com/search?q=television+will+suddenly+turn+off+every+4+minutes ..

Check the internet connection. The television can't update if it can't see the internet. Resetting it breaks the previous settings. Just for fun, reboot the router as well and wait 15 minutes until all the lights come back on. Then reestablish the television connection to the router. Harwa is not a make we know here in North America. https://www.google.com/search?q=Harwa+Smart+television.+How+to+restore+Apps ..

general steps: Get the TV remote control and push the "Menu" button and select "Options". Select "Child Lock" from the "Options" list. On some televisions, the "Child Lock" is named "V-chip". Choose the "Remove Child Lock" selection. Highlight this and then hit the "Enter" button. Enter the four-digit code that you used when you activated the child lock feature. If you cannot remember it, your only option to deactivate the child lock is to reset the TV. The instructions for resetting a TV is written on the user's manual of the TV. Exit the TV menu once you have entered the four-digit code. To do this, press the "Exit" or "Menu" button on the TV's remote control. If you don't have a remote, you might try leaving the TV unplugged overnight. Some TVs will 'forget' their settings if left without power for a long period. You could also potentially buy a cheaper universal remote, and use that to turn off the child lock.

To pair your Ruwido Amadeus R 9710 remote to your TV, you can follow these steps: Insert Batteries: Your remote is powered by two 1.5 V AAA batteries1. Make sure to insert the batteries correctly. Switch on your TV: Ensure your TV is turned on. Press the TV key: Press the TV key on your remote control for approximately 4 seconds until the LED flashes twice. Enter the Code: After seeing the 2 flashes and within 5 seconds, enter the 3-digit numerical code from the list provided with your remote2. After entering the code, the LED will flash twice indicating that the code has been accepted. Test the Remote: Point the remote control towards your TV and press the key. If your TV does not respond by going into Stand-By mode then repeat steps 3 to 5 and enter the next code in the list. Bed.-Anl. H2 Version1 (ruwido.com)

That sounds like it has a backlight fault. A good TV engineer can possibly repair that for you.

Ask your parents. There is no easy way to defeat the parental lock.. https://www.google.com/search?q=Tek+model+L26D10+TV+unlock+code ..

TV maker is Palladium codes are 0560, 398, 391, 446

Try cleaning behind them with electronics switch cleaner spray, but it may be the whole module is faulty. https://www.google.com/search?q=jvc+kw+av50+volume+button+not+working ..

Question edited for clarity. Question moved from Car Audio category. Help in the link https://www.google.com/search?q=Ecco+32+inch+smart+tv+lh32+is+showing+red%2C+blue%2C+green%2C+white+and+grey+simultaneously+when+I+turn+it+on ..

The axles may have substantial amount of in/out play, 1/4 inch or more. Does the axle in question actually drive the wheel or does it freewheel?It's a typical differential so if you get both wheels off the ground and spin one wheel, the other wheel should rotate in the opposite direction.The axles are retained by the differential assembly (inside transmission) so if the axle is truly falling out, to fix it will require transmission be removed and opened. Probably not an economical repair unless you can DIY or replace with good used unit.

Turn on your Sky Box and TV. On your Sky Remote, press the TV button. Simultaneously press the Select and Red buttons until the red LED on your remote blinks twice. Enter one of the following 3-digit remote codes for Sky TV: 2274 2169 1874 1798 1872 1873 The light on the remote should flash twice. If it blinks only once, repeat the steps with the next code. Press the Standby button on your remote. If your television turns off, press the Select button to save the setting. Turn on the TV and press TV Guide; if the TV Guide list displays on the screen, the programming was successful. Remember that there are multiple versions of Sky Remote Controls available, so ensure you have the most recent version. If you encounter any issues with the 3-digit codes, you can also try using a 4-digit code. Here's how: Repeat steps 1 to 3. Enter the 4-digit Sky remote code for your TV brand. Press the Standby button. If your TV turns off, press Select to save your settings. Check if the TV Guide displays successfully on the screen. Sky TV Remote Control Codes