20 Most Recent Samsung SF-5100 Plain Paper Laser Fax - Page 2 Questions & Answers

Did you press the sent button.

if hour model is sf 5100P you can print but no P you can not

is the tel line in the right socket at the back. if yes take the power out hold the red stop button in and put power back.

take ther power out and hold the red button in and put the power back. check if the tel line is in the line socket

Open the door take the cartridge out clean the roller at the back with dishwasing liquit and see if there is no paper stuck in unit. put ther cartridge back and take the power out and hold the red stop button in and put power back.

take the power out hold the red stop button in and put the power back.if that do not work the main board is foulty.

see if the tel line is in the black plug. and see if you got a dial tone. if not test line whit other phone. if no tone. fone your provider.

remove the fuse on the cratridge

did you replace the fuse in the cartridge.remove it.

TONER

had the same problem. replace the main board

take the power out.hold the stop botton.put power back

Take the power out. hold the red button in and put the power back. this will reset the unit

take the power out. hold the red buton in and put the power back. this will reset the fax m/c

take the cartridge out. in the middel you will see a black roller at the back. clean it with soap.if the rubber has cracks in replace the rubber.

Take the power out. hold the red button in put power back.

first of all the model of the printer must be sf-5100P. if there is no P the fax can not print form a pc or laptop. you will find the driver on the samsung site.

take the new cartrige out. you will see there is a fuse on it. take it out and put new fuse any amp. put the cartridge back and close the door for 2 sec. take the cartrige out and remove the fuse. put it back in. it should work.if not push setup#1934set up againyou will find under the setup a toner egnore put it on.and swich unit off and on.

you will see there is a fuse on the cartridge. replace it with a new one. it can be biger becouse you will remove it again.put the cartrige back with other fuse and close door for 3 secons. take cartridge out and remove the fuse.put cartrige back with out the fuse. it sould work. the other way is to push setup and then # 1934. push setup again check for new cartrige or egnore cartrige.swich m/c off and on.

take the power out. hold the red button in and put the power back. this will reset the m/c