Belkin Wireless Surf Router (F7D2301) - Answered Questions & Fixed issues
My belkin router n3000 stopped working out of the blue , internet connection shows up but no internet
Try recycling the router by unplugging it then after 20 seconds plug it
back in. See if you can stay connected. If not, unplug the modem and the
router, then plug the modem in and let it cycle up for about a minute
or two, then plug the router in and let it cycle up.
If you turn your computer and router off at night, then when you turn
them back on, if the router boots up before the modem, it will have
connection problems. A power outage in the house causes the same thing
if the router cycles up before the modem.
Mi router belkin no meagara senal del interned por
Son muchas las causas de este problema con belkin router, primero tienes que darme mas detalles como quien es el provedor de internet? es DSL o Cable cuantas PC or laptos se conectan,solo la senal wireless no esta trabajando? o tambien usando el network cable.. dame un poco mas de informacion para poder ayudarte y solucionar este problema juntos
I need the subnet mask number
go to your computer open command pad type ipconfig/all hit enter and look for your subnet will be the same for your xbox.
Belkin model no.f5D8236-4v2 need security key
- Open a web browser on the computer. In the address bar of the web browser, type http://192.168.2.1 and hit "Enter."
- login using login details..
- Click on "Security" in the left-hand column under the "Wireless" heading.
- Use the drop-down menu and select "WPA/WPA2-Personal (PSK)."
Select either "WPA-PSK, WPA2-PSK, or WPA-PSK+WPA-PSK2" as your Authentication; doing this will set the Encryption Technique automatically.
- Enter a word or group of characters in the password (PSK) box. The Pre-Shared Key must be 8 to 63 characters in length.
- Click the "Apply Changes" button to save the settings.
- You've now set up WPA/WPA2 security on your network.
For reference,follow this blog-----
Belkin N F5D8236-4 Wireless Router
I changed my password and I cant get back on xbox live
Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1 The default PW = blank (just press Enter) You can now change the default admin password. You can now configure the wireless settings. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security
Want to connect an iPad to wireless router, it
Make sure you are entering the letters in upper-case when entering the password to connect to this router. The iPad always shows letters on the keyboard in upper-case, but they may be entered in lower-case and it will not connect.
Watchguard modem connection
What you should do is set the modem into bridge mode, plug that into the routed port (outside world or WAN) of the firewall and configure that to manage the login.
Can you connect several n300 routers
Connect a computer to one of the Belkin's "LAN" ports with an Ethernet cable.Open a Web browser and enter "192.168.2.1" into the address bar. Press "Enter."Click "Login," then click "Submit."Make a note of the WLAN MAC address on the Status page.Click "Wireless Bridging" under the "Wireless" category.Click to check the two boxes "Enable wireless bridging" and "Enable only specific access points to connect."Type the MAC address of the
Belkin router and the MAC addresses of the other wireless routers or
access points that are participating in the bridged WDS network. If
using Belkin devices, repeat the previous steps to obtain the WLAN MAC
addresses, otherwise refer to the owner's manual of the wireless device
to find the WLAN MAC Address.Click "Apply Changes" to save the settings.
My belkin surf suffers from
You are correct in hearing that Belkin products are often unreliable. I suggest going with a linksys wrt54g router. Very reliable and a great price as well
The website (http://192.168.2.1) is not
Try 192.168.1.254
You can also find out the router's IP address by clickin on start and typing in cmd and clicking on it. Then type in ipconfig and hit enter. The default gateway is what you want to type into your browser.
Thanks for using FixYa!
How do I change the password for my internet
1. In your browser, type http://router
If you have problems type 192.168.2.1 and press enter.
2. You will be asked to enter your password. If you have never set a password, leave the "Password"
field blank and click "Submit".
3. Click "Wireless" in the left-hand menu. Then click "Security" just below that.
And there you can set your password for WiFi
I bought it from my cousin my internet got cut off
There should be a small button on the router, Sometimes labeled "reset". It's often red/orange and you may need a paper clip to press it. Push the button while the router is plugged in and it will reset the router to factory defaults.
After, that when logging in, just click submit as the router has no password from the factory.
Source:
"http://en-us-support.belkin.com/app/answers/detail/a_id/48/session/L2F2LzEvdGltZS8xMzA0MzE1Nzc5L3NpZC81NVF4OFdzaw%3D%3D"
And the
source about the password
"http://en-us-support.belkin.com/app/answers/detail/a_id/30/~/setting-the-router%27s-administrator-password"
Forgot my password need to know how to get it
You will need to Perform
a hardware reset
Performing
a hardware reset will return your device to factory default. You will
loose any custom settings you have added.
Setup steps:
- Locate the reset hole on the router. The button will be on the back or side of the router.
See images below:
- Leave the router powered on.
- Use a paperclip (or similar) to press and hold in the reset button for 10 seconds.
- Remove the paperclip.
- Wait approximately one minute for the router to restart.
The settings for the router have now been reset back to their default.
Hope this helps
How do i connect a
Normally, that is all done through the wireless printer settings. Pull out your manual and run through the printer setup and enter your wireless security key so that i will connect to your network.
Not finding what you are looking for?