20 Most Recent Orion STV2763 27" TV - Page 5 Questions & Answers

turn blue black to off. turn tv to av mode. then adjust g2..until retrace lines appear on the screen.then decrease the g2 until the retrace lines disappear.

Tries use the front or right side panel manual controls panel.Use the Channels buttons UP/DOWN push the channels UP button couple time.U should get in Video 1 or 2 which ever ur video game console hook in.Or your tv might just have a manual video button,put that u in video 1 or 2.Try website 1-800-remotes Factory original to buy an exact remote ur problem solved.None the solutions,help.

Use the channel up-down button. hope this helps..

We have a Sony TV but can't shut off the closed captioning.
How do I do this? Do I use the TV remote or the Direct TV remote.
Thank you.?

http://desc.shop.ebay.com/i.html?_nkw=STV2763&_sacat=0&LH_TitleDesc=1&_trksid=p3286.m270.l1313&_odkw=STV2763&_osacat=0&_rdc=1

The Manufacturer is Sansui and the product code for the Remote for your TV is 076R0DJ02B. You can purchase it online by using the "Buy One Now" link from this site http://www.orionsalesinc.com/miva/merchant.mvc?Screen=CTGY&Store_Code=OSI&Category_Code=STV2763

You can also Purchse a manual for your model using the same link.

This a free air signal tv? Get a better antena like a Digital atena rescan again.

GO TO THEIR WEBSITE :

http://www.orion.newremotecontrol.com/catalog_item.php?catnum=076RODJ02B , THANKS AJ

Does the TV has AV? IF it has, then you would have to look at the back of the TV again, there should be a 20 pin connector if you don't see the place where the yellow, white and red wire will fit into.

If the TV does not have AV, then follow the steps below;

1. Get a Video cassette recorder (VCR)
2. Use an RF wire to connect the TV to the VCR.
3. Search the TV station to get the VCR displayed on the TV
   
4. Connect an antenna to the VCR
5. connect your CD Player to the "in" of the VCR
6. Press the AV on the VCR and your Cd player would display
   
7. By now it should be ready for use.

If you miss any step, let me know so that I can direct you further.

Best wishes.

try 1035 or1191 per the rca direct tv user guide page22 if you have one

re-tune stations

Try to switch channels all the down and right below channel 2 or above 125,(that is in between the two channels) you should get video in there. good luck

Use the channel buttons and take down right below channel 2 or above 125

Make sure there is not a speaker switch in the audio portion of the menu. Other than that you probably have a problem in the audio circuit inside the set. Thanks

Unfortunately Orion has no other way to switch the inputs but with the remote. www.remotes.com has an original remote. Thanks

If there is a mode button, otherwise if there are not other buttons on the set itself, try tuning channels with autoprogram or channel add/edit and see if there is an INPUT or AV channel.
Otherwise you can get universal or origonal remote online.

These sets don't like universal remotes. It's almost like Orion made them this way. Try this tip http://www.fixya.com/support/r387655-orion_tv_remote_code_here .

I found the solution on AV Forums. Here's the link:

http://www.avforums.com/forums/lcd-televisions/635155-orion-tv-products-help-advice.html#post6566313

With your remote, go into the menu, find the audio setup and click off the SAP. Thats the Second Audio Program. Some Broadcasters send a second lanquage along with the regular audio. Someone must have been looking around or playing with the remote and turned on the SAP.. Good Luck PS please do not forget to rate this thread