Top 20
Serif Digital Scrapbook Artist 2 for PC (DSA2USMBRT) Questions & Answers
I have just purchased my scrapbook artist 2 CD but
hi This issue can be caused by any of the below possibilities
1. File is corrupt, bad, or missing
2. File is not designed for your version of Windows.
3. File is a virus, worm, or other malware file
4. Hardware incompatibility
i suspect your problem to be /2or4 .silly question does it give your particular windows as one of the designates for your program.if there is hard ware incompatability you could try if you have vista orwindows7 to make you program compatable. hope this helps.
Window 7. Installed Serif PhotoPlus 7, years ago. It has worked well but now continually says "Failed to open" Why??
There could be several reasons why Serif PhotoPlus 7 is failing to open on your Windows 7 computer. Here are a few things you can try to troubleshoot the issue:
- Update the software: Check if there is an updated version of Serif PhotoPlus available and install it. Sometimes, updates can fix compatibility issues with newer versions of the operating system.
- Check for conflicting programs: Make sure that no other programs are running at the same time as Serif PhotoPlus, as this can cause conflicts that prevent the software from opening. Try closing all other programs and then attempt to open Serif PhotoPlus again.
- Check for system requirements: Make sure your computer meets the minimum system requirements for Serif PhotoPlus. If your computer does not meet the requirements, then the software may not work properly.
- Reinstall the software: Uninstall Serif PhotoPlus and then reinstall it. This will ensure that all necessary files are present and that any corrupted files are replaced.
- Check for hardware issues: If none of the above solutions work, then it is possible that there is a hardware issue with your computer, such as a faulty hard drive or insufficient RAM. Try running a diagnostic test on your computer to determine if there are any hardware issues that need to be addressed.
If none of these solutions work, you may want to contact Serif's technical support team for further assistance.
Registration key
Visit http://www.serif.com/?MC=SERPPCBR1&gclid=CJ2crtiR370CFRQS7Aodjw0AsQ and download a free copy of PP6. Also look at the other free software as it all works together. X7 is the current 64-bit of their software. Expect a telephone call from one of their salespeople. Insist that you have a friend who has bought each of their titles for $35 each (me) and insist that they send you a free user's manual -- you need it as their software is feature rich.
I . received a spreadsheet
I would make a foulder on my desk top and copy and paste the photos into that foulder the when you start you burning software just add the pictures in the folder to burn software and burn
My customer id X840457AU
OK ...I assume that you have a document with pictures and photos..and cause it does have photos inserted ..it may be too large to send via regular mail ..(for ex yahoo has 10 M max size for the attachments ) In this case the solution is to send it via a site for sending large files...There are sites that allow you to upload a large file..than enter the email of the person you need to send to ..and they will be notified about and in the email they receive ..there is a link where they can download he file during the next 10 days ..
Here is the link for the site ..
https://www.yousendit.com/just insert your email first ..than the other person's email ..than from the select file ..browse your hard disk and select the file for to be uploaded..and click send file ..You do not need to click on other otions ...After pressing send there will be a page that ask you if you want to be notified about the download ..click no ..cause that service is not free...The rest will be free and the steps I described are the only one needed to be done..wait for the file to be uploaded...A link will be automatically send to the receiver ..and one will be listed to you to keep if you want to send it manually ..Usually they keep the file for 10 days ..and anybody that have the link can download it ...
I lost my registration key
Yes, you can send an E-MAIL to the company and ask them to e-mail you a new registration key for Drawplus X4; I'm sure they'll be happy to help you. NO ONE at FIXYA is going to help you become a software pirate. NO ONE at FIXYA is going to be stupid enough to do something illegal.
Send an E-MAIL to the company and get a LEGAL registration key; problem solved.
Problem # 1: My
Hi maryanmeto,
I see that your file may have been corrupted or maybe encountered a problem.
You mentioned that you have it saved right do not make anymore changes on it, try and recover the file by using the Recuva program, don't worry this is a safe program, let me give you the link where to download the program it will be small and can be downloaded fast.
Recuva Downoad - File Recovery tool
Once on the website on the upper right you will see download latest version just click on that and it will ask you to save after saving run the program to be installed on your computer as soon as the installation finishes click on next then it will be asking you what type of files to recover, just select what type of file you will be recovering for it to search and show you a list of file to recover.
I hope this can help.
Thank you for choosinf Fixya,
mvincentc
When I try to import
Microsoft File was a Flat database program developed for the Macintosh and ran on Mac OS 6.x & 7.x. I was part of Microsoft Tech Support 20 years ago and supported this program.
Are you sure that is the program you are using?
Are you on the Macintosh? If so what version of the Mac OS are you using?
Thanks
Ed
Just bought PC Mover.
Can I
I have used PC Mover a couple of times and the USB that came with it worked just fine. Follow their directions exactly, tho. If I remember correctly, the directions were quite easy to read and follow. If you are just trying to use the program and didn't buy it new and you have no instructions, I would be cautious.
Lost tool bar while working
Click into control panel and right click on "taskbar and start menu. This will bring up a window where you can auto hide , move etc. In the options in window check,"locktool bar", "keep toolbar at top of other winows", and "show quick launch". Uncheck anything else. Go to bottom and click "apply" then click ok.
When I press print, it
In windows Vista or 7:
Open Printers by clicking the Start button , clicking Control Panel, clicking Hardware and Sound, and then clicking Printers.
Right-click the printer you want to use, and then click Set as Default Printer. A check mark is displayed on the printer icon to mark it as your default printer.
In windows XP:
- Open Printers and Faxes; click Start, click Control Panel, click Printers and Other Hardware, and then click Printers and Faxes.
-
- Right-click the printer you want to use as the default printer, and then click Set as Default Printer. A check mark appears next to the printer icon in Printers and Faxes.
Hope this helps!
I am using Serif Draw
Well follow my lead :
1. Click on insert tab .
2. Select the object option.
3. If you have to display the content select object menu item.
4. A drop down list will open select the serif plus program if visible if not then you can only link the file.
5. now a browse file dialogue box will open select your file that is to be shown.
6. that's it enjoy.
easier method.
1. install Ashampoo magical snap( takes screen shots from your desktop)
2. take the screenshot of your file and save it as a picture.
3. now i guess you know how to display a picture in a word document
have fun :)
vote if solved
Not finding what you are looking for?