20 Most Recent SVA-USA HD4208TIII-PDP 42 in. EDTV-Ready Plasma Television - Page 4 Questions & Answers

Its probably your power supply failing. Mine did the same thing after about a year and a half. Of course its out of warranty and the shops around town cant get the part, and theres virtually no way to get a hold of SVA. But good luck with it.

Hi This site has it http://www.partstore.com/
click on the remote tab or enter the part number

HI ,

You can only buy it from
http://www.sva-usa.com/

BUY DIFRENT BRAND OF TV DONT DO BUSINES WITH SVA TV NOT GOD PARTS THE SAME RIP OFFFFFFFFFFFFFFFF

BUY NEW TV

A rolling picture means it is either not getting a good signal (possibly a bad cable or connection), or it is receiving interferrence from another device you have connected. Try disconnecting other devices or turn the power off to other devices and see if the rolling goes away. If you have Y cables connecting two devices it can cause this kind of interferrence even if the second device is not turned on.

push down the channel up and down together and the tv menu will pop up use the volume up and down to change what you want good luck.

Your TV may not support your HD channel signal. Check with HD DVD & non-HD DVD players to confirm.

If you had this problem from Day one, you should go directly who you bought it from and see what they can do for you for the company info or service agent.

Does the same thing happen if you turn it on without the remote?

If not, it's likely a short in either the remote or the sensor on the TV that receives the remote signal. A short in either would break the power on signal into two separate signals, which the TV would interpret as you hitting the power button twice, and would thus turn on and then immediately back off. If that's your problem, I'd suggest getting ahold of another remote for your set, or a universal remote that you can program for your set. There's a good chance that will fix it, and it's much easier than trying to fix the sensor.

If the same thing is happening when you use the power button on the TV, we have an entirely different problem, most likely a short somewhere. The power supply detects the short and shuts itself off to avoid doing more damage (or causing a fire). Sort of like how a circuit breaker works. That would explain it turning on and back off immediately. If that's your problem, you'll have to have someone who's handy with electronics take a meter to it and find the short. How you fix it will depend on exactly where the short is.

-Dyllan

i think the picture tube is faulty or gone you have to change that.

Did you find out anything my SVA is doing the same thing. Thanks, Mark

Switch to Air, or ASTC in Menu, re-scan. If it's cable, switch to cable, re-scan.

Closed caption function is On. Turn it OFF.

If it is a burn our then the panel is kaput, otherwise, it must be the inverter.

www.codes.com

some universal remotes are used only tv play.they did not open menu .so you bought original remote and solve your problem. thank you.

Hi,

With remote access the user menu and then Turn off the ' Closed Caption ' feature.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Sorry, we do not supply anything. I would aproach the supplier or manufacture for advice and spares availability.