20 Most Recent
Janome Even Feed Foot w/Quilting Guide - Page 4 Questions & Answers
Cricut Explore Air 2. Where should screw be installed?
- Gently push the pin on the top of the housing, unscrew the black arm, open Clamp B and carefully pull out the blade housing from the bottom.
- Remove the protective cover from the new blade.
- Insert the new blade into the housing and the magnet in the housing will hold the new blade in place.
- Replace and return the blade housing into your machine, Clamp B and the black arm. Tighten the screw close it back into the machine.
Does it matter when you add hops to your home brew?
Yes it
actually alters the taste of the beer depending on when you add the hops. If
you add it at the beginning of the boiling process, it will add bitterness to
the flavor but not so much aroma. If you add it at the end, you will get the
aroma but not much bitterness.
Can I connect my Cricut expression to my computer?
Yes you can. You need a cable that will go from your machine to your computer. It's usually just a simple printer cable. Then you have down download some software from Cricut.com called Cricut Craft Room. Then you should be good to go. :)
I did not receive enough sequins in my kit.
Please understand that you are talking to regular people who offer advice, not to the company that made your product. Contact the seller of your item directly for their return policy
Not finding what you are looking for?