20 Most Recent Yamaha RX-V1500 Receiver - Page 3 Questions & Answers


Hello Gerardo, check the impedance of your speakers are 8 Ohms or more, if they are less than 8 Ohms, you can produce the failure you say
It also checks the real power that each speaker can handle and that is according to the manufacturer's specifications
Check the connections of the speaker cables, which do not have copper hairs that are joining between the positive and the negative
Test, disconnect all the speakers and go connecting one to one and try in high volume, then disconnect that and connect another and tests, so with all
This test is to know if you have any speaker with problems
If you can not solve, look for a specialized technical service
Greetings Franco Dosil

Hola Gerardo, comprueba la Impedancia de tus bafles sean de 8 Ohms o mas, si son de menos de 8 Ohms, puede producirte la falla que comentas
Tambien revisa la potencia real que puede manejar cada parlante y que este de acuerdo a las especificaciones del fabricante
Revisa las conexiones de los cables de parlantes, que no tengan pelos de cobre que se esten uniendo entre el positivo y el negativo
Prueba, desconectar todos los parlantes e ir conectando de a uno y probar en volumen alto, luego desconectas ese y conectas otro y pruebas, asi con todos
Esta prueba es para saber si tienes algun parlante con problemas
Si no logras resolver, busca un servicio tecnico especializado
Saludos Franco Dosil
https://usa.yamaha.com/files/download/other_assets/1/334221/RX-V995.pdf
https://www.manualslib.com/manual/197447/Yamaha-Rx-V995.html

Yamaha Audio... | Answered on Jun 13, 2019


The internal microcomputer has frozen, due to an external electric
shock (such as lightning or excessive static electricity) or to a drop
in the power supply voltage.
Hold down z (power) on the front panel for more than 10 seconds to initialize
and reboot the unit. (If the problem persists, disconnect the power cable from the AC wall outlet and plug it again.)

Yamaha Audio... | Answered on Jun 11, 2019


Do the lights come on? The click is the relay throwing the unit into prtection mode. Check to make sure the speaker wires are secure in back and not touching each other...

Yamaha Audio... | Answered on Jun 10, 2019


this is fixya not yamaha

Yamaha Audio... | Answered on Jun 04, 2019


"Is there away to check the subwoofer output signal , to confirm if the signal is correct." Yes.
(1)Input 1KHz sine wave downloaded from internet into subwoofer.
(2)open the subwoofer
(3)connect an oscilloscope to the speaker output.
(4)Probe to +ve terminal. -ve terminal to earth clip.
(5)Observe any discrepancy.

Yamaha Audio... | Answered on Jun 03, 2019


“Yamaha RX-V473 AV Reciever how to turn on standby mode?” Download RXV473 service manual and user manual to solve this problem or phone yamaha to call for help.

Yamaha Audio... | Answered on May 26, 2019


“has no sound on FM Radio but does have sound on AM Radio and TV any advice would be appreciated.” Problem comes from the ALL-IN-ONE radio tunner, replacing it to fix the problem.

Yamaha Audio... | Answered on May 26, 2019


Hello Sandy, for what you say, it is very likely that the system that raises and lowers the arm is hardened or locked
It would have to disarm and clean the mechanism
I do not suggest you do so, contact a specialized technical service
I hope I can solve the problem
Greetings Franco Dosil
Hola Sandy, por lo que cuentas, es muy probable que se encuentre endurecido o trabado el sistema que sube y baja el brazo
Habria desarmar y hacer una limpieza al mecanismo
No le sugiero que lo haga, pongase en contacto con un servicio tecnico especializado
Espero pueda resolver el problema
Saludos Franco Dosil

https://www.vinylengine.com/library/yamaha/p-550.shtml

Yamaha Audio... | Answered on May 20, 2019


Hello Azhar, for what you comment, your Yamaha is protecting itself, that's why it stops emitting sound and listens that the relay is working, it's not a problem of relay
I recommend that you check the cables and speaker connections, that there is no short circuit, also check that all the speakers are heard, in each speaker
Try disconnecting the baffle from the left channel and check if the sound of the right baffle is cut, then disconnect the right one and reconnect the left one, also check if it cuts
If in some cases it is cut, that is the channel that is wrong or with problems
If you have technical knowledge, disarm the amplifier and do a cleaning and check possible false contacts, which could cause the failure, Just do this, If you have technical knowledge, but approach a specialized technical service
I hope you can solve the problem
Greetings Franco Dosil

Hola Azhar, por lo que comentas, tu Yamaha se esta protegiendo, por eso deja de emitir sonido y escuchas que el rele esta funcionando, no es un problema de rele
te recomiendo que revises los cables y conexiones de parlantes, que no haya ning?n corto circuito, tambi?n revisa que se escuchen todos los parlantes, en cada bafle
Prueba desconectar el bafle del canal izquierdo y f?jate si se corta el sonido del bafle del derecho, luego desconecta el derecho y reconectas el izquierdo, tambi?n comprueba si se corta
Si en alguno de los casos se corto, ese es el canal que esta mal o con problemas
Si tienes conocimientos t?cnicos, desarma el amplificador y hazle una limpieza y revisa posibles falsos contactos, que pudieran producir la falla, Solo haz esto, Si tienes conocimientos t?cnicos, sino ac?rcate e un servicio t?cnico especializado
Espero puedas resolver el problema
Saludos Franco Dosil

https://www.electronica-pt.com/esquema/func-download/42276/chk,483ce31ea5bd6bb6e9bfd7b3cfd20ec0/no_html,1
https://elektrotanya.com/yamaha_mx-1_mx-2.pdf/download.html

https://www.manualslib.com/manual/197284/Yamaha-Mx-1.html

Yamaha Audio... | Answered on May 16, 2019


5 seconds shut down: dc protection triggered. (DC outputted from speaker terminals.)Make sure +B and -B are equal first . The problem also comes from voltage amp circuit board including differential amp and constant current source but power transistors mounted are ok. Remember to download HTR 6130 service manual .

Yamaha Audio... | Answered on May 08, 2019


Hello Claude, try replacing the cable of your laptop, if it still fails, change input on the Yamaha or try another notebook, this way you are discarding fault elements
It would be good if you commented that the brand and model is your portable
I hope you can hear your laptop on your Yamaha
Greetings Franco Dosil

Hola Claude, prueba reemplazar el cable de tu portatil, si aun falla, cambia de entrada en el Yamaha o prueba con otro portatil, de esta manera vas descartando elementos de falla
Seria bueno que comentes que marca y modelo es tu portatil
Espero que logres escuchar tu portatil en tu Yamaha
Saludos Franco Dosil

Yamaha Audio... | Answered on May 01, 2019


Hello Dianna, check that the cable that goes from the decoder is well connected, if so, change it for another of the same characteristics, if this continues the problem, connect the decoder to another input of the TV, if it still does not work, connect the decoder on another TV and check that you see it, if this is so, you would have to have the TV checked at a specialized technical service
You have not specified which TV model you have
I hope you have served my suggestions
Greetings Franco Dosil

Hola Dianna, controla que el cable que va desde el decodificador se encuentre bien conectado, si es as?, c?mbialo por otro de iguales caracter?sticas, si as? continua el problema, conecta el decodificador en otra entrada del televisor, si aun as? no funciona, conecta el decodificador en otro televisor y comprueba que lo vea, si esto es as?, tendr?as que hacer revisar el televisor en un servicio t?cnico especializado
No has especificado que modelo de televisor tienes
Espero te haya servido mis sugerencias
Saludos Franco Dosil

Yamaha Audio... | Answered on May 01, 2019


Hello Suzanne, if the system you use with your Yamaha HTR-6063, is compatible with the Yamaha RX-V685
I send you the links to download the user manual of the Yamaha RX-V685 and the Quick Guide of your Yamaha HTR-6063
I hope my comment will serve you
Greetings Franco Dosil
Hola Suzanne, si el sistema que usas con tu Yamaha HTR-6063, es compatible don el Yamaha RX-V685
Te envio los link para que descargues el manual de usuario del Yamaha RX-V685 y la Guia Rapida de tu Yamaha HTR-6063
Espero que te sirva mi comentario
Saludos Franco Dosil

https://uk.yamaha.com/files/download/other_assets/2/1182662/web_ZZ76260_RX-V685_qsg_BGEFS_EnFrEsPtRu_A1.pdf

https://au.yamaha.com/files/download/other_assets/0/317610/HTR6063_IM.pdf

Yamaha Audio... | Answered on Apr 30, 2019


Hello Garry, ask, have you tried on both AV1 and AV3 fiber optic inputs on your Yamaha?
Because apart from these two inputs of Fiber Optics, the Yamaha, has an Optical Fiber Output, which could lead to a connection error
I sent you the link of the User's Manual so you can download it, on page 5, it shows the back panel of the HTR-6295
I hope my comment has served you
Greetings Franco Dosil

Hola Garry, pregunta, has probado en las dos entradas de fibra optica AV1 y AV3 de tu Yamaha?
Porque aparte de estas dos entradas de Fibra Optica, el Yamaha, cuenta con una Salida de Fibra Optica, la cual podria llevarte a un error de conexion
Te envio el link del Manual de usuario para que lo descargues, en la pagina 5, muestra el panel trasero del HTR-6295
Espero te haya servido mi comentario
Saludos Franco Dosil
https://ca.yamaha.com/files/download/other_assets/2/324702/HTR-6295_C.pdf

Yamaha Audio... | Answered on Apr 30, 2019


Hello Richard, if your Bose Acoutimass 5 Series II, are compatible with your Yamaha RX-V379, using them in the L and R Front outputs of the Yamaha, this set is prepared to work between 10 to 200 watts of power, your Yamaha delivers 70 watts per channel, what is within the range of work of the Bose
I am sending you the link so you can download the Bose guide
I hope you enjoy the Yamaha-Bose convention
Greetings Franco Dosil
Hola Richard, si tus Bose Acoutimass 5 Series II, son compatibles con tu Yamaha RX-V379, usandolos en las salidasL y R Front del Yamaha, este conjunto esta preparado para funcionar entre 10 a 200 watts de potencia , tu Yamaha entrega 70 watts por canal, lo que esta dentro del rango de trabajo de los Bose
Te estoy enviando el link para que puedas descargar la guia de los Bose
Espero que disfrutes de la convinacion Yamaha-Bose
Saludos Franco Dosil
https://www.bose.es/es_es/support/products/2_speaker_home_theater_support/am5_series2.html#SupportTabs_tab0

Yamaha Audio... | Answered on Apr 30, 2019

Not finding what you are looking for?
Yamaha RX-V1500 Receiver Logo

41 questions posted

Ask a Question

Usually answered in minutes!

Top Yamaha Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

The Knight
The Knight

Level 3 Expert

76099 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Yamaha Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Yamaha Audio Players & Recorders

  • Yamaha Audio Players & Recorders

Most Popular Question

receiver shuts off after 3 seconds

  • Audio Players & Recorders
Loading...