Top 20
7752V Replacement Transmitter Supercode Remote for 5901 Responder LC3 Questions & Answers
Como cambiar la hora de mi viper 7752v
I got this free Pdf manual from an online store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the all the times I fixed the chipper in these 4 years
7/5/2014 9:18:49 PM •
7752V...
•
537 views • 0 helpful votes
My sst 7752v viper remote will not unlock my
how old is the remote is a question to consider. the batteries might just be too low to send a strong enough signal for the truck's transponder to receive. does the remote need to be coded to the truck if not more than likely its weak batteries. the LCD display doesn't need much power to light up, but the remote does to send the signal.
8/8/2013 9:55:23 PM •
7752V...
•
1,721 views • 0 helpful votes
My Viper remote won't turn on or charge.
The battery is probably dead. There is a guy on ebay that is replacing them. He fixed mine and it works great. The batteries dont last forever and you cannot just buy them they are a special type, also viper suggests you buy a new remote for $299 because they do not replace the batteries... how convenient. Hopefully that helps.
12/3/2012 12:46:00 PM •
7752V...
•
8,821 views • 0 helpful votes
How to set viper 7752v remote on vibrate
Press and hold the "f" button the remote for approx. 8 seconds. The screen will display remote setup. Press the Aux button to scroll up and the remote starter button to scroll down. Press and hold the "f" button to enter the selected feature, which would be page alert. When the option you want is displayed on the LCD screen (vibe,tone,both,off) press and hold the "f' to save. You can press lock or unlock at anytime to exit the remote programming. You can also press "f" then lock or unlock to silent arm or disarm without going through the above programming procedure.
8/20/2012 2:23:54 AM •
7752V...
•
3,787 views • 3 helpful votes
I just received a brand
Try plugging the charger into an outlet then, plug the charger into the remote, remove, plug in, remove...Do this for approximately six(6) times or, until "charge" appears on the remote. When "charge" appears on the remote leave it pug up to complete charge.
7/11/2011 6:52:38 PM •
7752V...
•
2,416 views • 1 helpful votes
How to program a 7752V
Open driver door.
Push and hold "f" key until remote beeps.
Push remote start button once so "pair" appears on screen. Push and hold "f" until remote beeps three(3) times to select pair mode.
Insert key into ignition an turn to "ON" position.
Push and release "valet" button on antenna, push again and hold until remote emits a series of beeps and displays "passed"
2/8/2011 6:28:55 AM •
7752V...
•
16,541 views • 1 helpful votes
The blue light on antenae in car won't stop
the only way i would know to stop it would be to unplug it from the modual. its just an indicater light so unplugging it shouldnt cause any problams.
3/9/2011 1:49:08 PM •
7752V...
•
1,571 views • 0 helpful votes
Hi, my viper remote starter working good but there
Hi jasandeep,
I understand that there is no display on the screen when you start the car, the issue probably lyes internally, have you tried replacing with new battery? if that does not help then i would suggest you to bring your Remote start to an electronic store and ask them about your issue so that it can be solved or replaced free of charge providing you have the receipt. i am afraid nothing can be done on the internet to fix your device as it is a physical problem.
i hope this helps.
3/28/2011 12:17:31 AM •
7752V...
•
377 views • 1 helpful votes
Will not charge
I have the viper
rpn 7752v remote. I was away for a month and the remote completely died. I plugged it into the
usb and nothing would happen. I called the installer and he told me a savvy trick. After plugging it into the
usb, press the function button. Repeat this several times before it actually turns on. Repeated attempts eventually worked. He said even the manufacture doesn't know why this works. If you still need help you can email me and I'll refer you to a good installer.
[email protected]. Tony
Madan
12/10/2010 12:15:45 AM •
7752V...
•
2,927 views • 25 helpful votes
Just baught a truck with
Can be somewhat complicated to explain, particularly without knowing the make, model & year of the truck and which bypass was used to integrate into the factory systems. But here's one thing it might be. The Viper system is aftermarket obviously, when the alarm is triggered the siren with start to sound, and sometimes the horn will honk as well (depending on the vehicle and the bypass). If the siren isn't blaring that means the Viper system was disarmed when you unlocked the doors but not your factory security....or another way to word it is if only the horn is honking and no siren then you're factory alarm system isn't being controlled by the viper remote the way it should be. The factory disarm wire needs to be connected. It's a light green wire with a black stripe in a red connector in the Viper alarm brain. For anything more specific I'd need some more info on the vehicle. You can email me at
[email protected] if you'd like.
11/17/2010 4:35:37 AM •
7752V...
•
640 views • 0 helpful votes
Not finding what you are looking for?