20 Most Recent Pyramid 705CD 7-Band Car Equalizer - Page 4 Questions & Answers

Quiero un Pyramid SE403-VL-LED Graphic Equalizer deseo que melo vendan buen estado

Pyramid Car... | Answered on Feb 21, 2015

chissis ground is just simply the car body metal, not metal that moves like car seat. drill a hole smaller than your screw and the drive the screw into it with a lug connected to your wiring

Pyramid Car... | Answered on Oct 25, 2014

Wrap paper around your "Pyramid Car Amplifier". It will then be the shape of at least your "pyramid"! :)

Pyramid Car... | Answered on Dec 13, 2013

PPI made those in the late 80's and 90's. There was a supply chain issue. They never really got popular.

Pyramid Car... | Answered on Jul 29, 2013

PPI made those.

Pyramid Car... | Answered on Jul 29, 2013

if you are hooking up to a stereo reciever make sure the ohms & wattage are correct or it could cause problems if you are hooking up to a car head unit i dont advise it could damage both headunit and sub

Pyramid Car... | Answered on Mar 08, 2013

a house reciever or car headunit

Pyramid Car... | Answered on Mar 08, 2013

Pyramid makes all kinds of audio amplifiers for your car.

Pyramid Car... | Answered on Dec 12, 2011

  • 4-Channel
  • 350W X 2 Max @ 4ohm
  • 700W X 1 Bridged @ 4ohm
  • Dim: 2.4"H X 10.7"W X 6.9"L
  • Mosfet Pwm Power Supply

Pyramid Car... | Answered on Jun 07, 2011

run rca cables and a remote wire from your radio to the amp,run a power wire from your battery and attatch a ground to the car ,then hook up the wires and cables to there respective places.

Pyramid Car... | Answered on Jan 15, 2011

I believe the white striped wire would be positive (red clamp), BUT DON'T COUNT ON THAT OR GUESS AT IT. Find someone with a volt meter to test the leads and tell you which is positive (red clamp) and which is negative (black clamp).

Car Audio &... | Answered 3 hours ago

We're can I buy a sd card for my eonon d5156 stereo

Car Audio &... | Answered 14 hours ago

Sony car radio cdxgt540ui buttons non responsive - remove four screws on reverse side of faceplate, pry open with fingernails starting at the top right or left corner of the face plate once opened remove board on the reverse side of the LCD there are small brackets holding the LCD use a needle nose to pry each bracket in straight position then remove LCD for ten seconds then place back on to board and been brackets back in place. After these steps the front buttons should work again this process worked for me.

Car Audio &... | Answered 2 days ago

Not finding what you are looking for?
Pyramid 705CD 7-Band Car Equalizer Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Pyramid Car Audio & Video Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1175 Answers


Level 2 Expert

80 Answers

Mark Skinner

Level 2 Expert

79 Answers

Are you a Pyramid Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Pyramid Car Audio & Video

  • Pyramid Car Audio & Video

Most Popular Question

donde puedo conseguir uno igual

  • Car Audio & Video