20 Most Recent Behringer Xenyx 1832fx Mixer 18 Input 32 Bus with Efx USB - Page 5 Questions & Answers

Go here on Youtube and see if any of the videos contents are close to your unit. https://www.youtube.com/results?search_query=disassemble+behringer+pmh+880

I doubt there is compatibility. http://www.fixya.com/support/t25995684-driver_umx49_os_windows_10 If it's worth it to keep using this unit, consider buying a good-enough cheap PC based computer with Windows XP. XP is no longer supported, but it's still useful, and it;'s one of the most stable OS's they ever released.

make sure its the proper power adapter. If its not it will introduce all sorts of noise. I would use a proper adapter from behringer. Of one of the adapter damaged the internals.

No, sorry, FIXYA is an internet only free service. It is aimed at "do it yourself" questions.

https://elektrotanya.com/behringer_ddm4000_mixer_sch.rar/download.html

That depends on what you want to end up doing. You will end up patching into/out of the jacks on the front. You do not come out of the jacks on the back to the crossover.

Theres no headphone jack.

powered , or you could buy and amp then use passive.

What is a behringer inuke 6000?

Owner's manual has phone number for company to request a service manual. http://www.fullcompass.com/common/files/18689-PMP2000UserManual.pdf

Call the store that sold you the amp if it is defective return it, you cab also call Behringers help line.

did you feed the instruments thru a mixer?. This is a $25.00 item and is only repairable under warranty. Call whomever you bought this from

Sorry this site doesn't have this info.

Watch your impedance, when you add speakers the impedance will change. example 8 ohm speaker placed in parallel with another 8 ohm speaker the impedance is 4 ohms, placed in series the it is 16 ohm Me I would place in parallel this mixer should handle 3 ohms

I found a Quick Start manual for the Behringer EuroLive B205D on the Behringer Download page: https://www.musictri.be/brand/c/Behringer/downloads?active=Downloads . Use the search boxes to select Loud Speaker systems and then find the B205D. The direct link to the guide in English is currently here: https://media.music-group.com/media/PLM/data/docs/P0957/B205D_QSG_WW.pdf . A product information sheet is also available. I also found the quick start guide at Manuals Lib: https://www.manualslib.com/manual/667932/Behringer-Eurolive-B205d.html . I hope this helps. Cindy Wells

Use the jacks on the back.

What your amp is doing is going into protection mode. The Class D amplifier topology uses a Pulse width modulation scheme which allows the audio to be modulated onto a generated square wave or pulse train. This is then sent through the MOSFET Driver and then to the High Power MOSFETs that drive the load. The square wave with modulated audio is then filtered by a low pass filter and you are left with your audio. This is great because of the very high efficiency. The downside is that there are more links in the chain to fail. In your case it sounds like one or both of your power MOSFETs are bad and are causing the watchdog circuit to send a shutdown signal to the switching power supply, this is why it is turning off. It is a safety feature to prevent catastrophic failure of the board. (ie. burning the PCB to a crisp) A technician experienced in PCB level troubleshooting shoot be able to repair this for you. Let me know if you need anything good luck.

Output B amplifier has a problem. Most likely the output transistor.

Specify the full fuse ratings please. Internal fuses come in all shapes and sizes.

Read the manuals for both the mixer and the active speakers. If you do not have the manuals, download them from the manufacturers websites. If you don't know hw to use equipment, don't buy it.