Pyramid PB1281X Car Audio Amplifier - Page 7 - Answered Questions & Fixed issues

Hi I have pioneer carozerria hzr990 and can't use usb

The vehicle has not been identified. The error message seems to appear on cd players when the tray refuses to eject. Lubrication of the ejection mechanism might help. Too little information has been provided to identify the specific model for any sort of disassembly. It is otherwise likely the player will have to be replaced.

It is saying WAIT 1 HR because the wrong code is being entered.

Leave it SWITCHED ON for an hour and it will reset itself

Make sure you have the correct code 

read below if you do not have the code
-----------------------------------------------------------------------------------------------

First make sure that the code has not been noted somewhere within the car (underneath the ash tray, glove box , rear of sun visor etc)
 
 
To see if your code is available here  for free then the radio will have to be removed from the dashboard (and if you are lucky, someone may have written the code on the casing ) .
 
If not then POST A BRAND  NEW  QUESTION
 
quoting the radio MAKE+MODEL plus ALL the LETTERS+NUMBERS on ANY LABELS ,BARCODES or STAMPED IN THE METAL CASING
 
Also quote the MAKE of CAR
 
note: Unfortunately not all radios can be decoded using the Serial Number
 
Otherwise try your Main Dealer ...........or take it into a Decode Service who will plug in a laptop to read/recode the memory chip (EEPROM). This takes a few minutes and shouldn`t be too expensive

BP937828363212

Try these website. It may help RADIO CODE UK ' Free Grundig WKC 5201 RDS radio code entry instructions and guides (radio-code.co.uk) GRUNDIG WKC 5201 RDS INFOMAT GR1001 / GR1001 Radio Code ' Online Service (carstereocode.com)

Question ordered for a lot more clarity. Yes, if you can remove the board, you can solder in a new socket. https://www.google.com/search?q=replace+usb+port+in+motherboard ..

here is a link ti similar model https://www.manualslib.com/manual/746679/Jensen-Xa2250.html#manual

According to a post on the Apple Community forum, some iPods may not connect to the Kenwood KDC-X993 car stereo via USB after upgrading to iOS 41. Unfortunately, there is no official update available from Kenwood to fix this issue. However, one user suggested trying DFU mode, which may allow you to step back down to a prior revision of iOS Ipod Touch will not connect to my Kenwood... - Apple Community

I found a wiring diagram for the 2005 Hyundai Elantra that might be helpful . According to the diagram, the color codes for the factory wiring harness are as follows: Wire Color Function Orange/Black 12V Constant Yellow 12V Accessory Black Ground Blue/Black Power Antenna Green/Orange Illumination Brown/White Left Front Speaker (+) Black/White Left Front Speaker (-) Brown/Yellow Right Front Speaker (+) Black/Yellow Right Front Speaker (-) Brown/Red Left Rear Speaker (+) Black/Red Left Rear Speaker (-) Brown/White Right Rear Speaker (+) Black/White Right Rear Speaker (-) If you don't have a plug on your factory wiring harness, you can hardwire it by connecting each wire to its corresponding wire on your new stereo. You can use crimp caps or soldering to make the connections . If you're not comfortable with hardwiring, you may want to consider purchasing an aftermarket wiring harness that clips onto the factory harness you removed off the rear of your factory radio during its removal. This will make it easier to connect your new stereo to your car's electrical system .Hyundai Radio Wiring Color Codes - Radio Codes Calculator

Not so. Becker radios are German products that are put into Mercedes (and other German imports). There are techs who advertise online and provide codes for a nominal fee. Worst case, you can contact BeckerUSA for a code for a bit higher-than-nominal fee.
Pontiac. Nice try.

See this manual. It may help. FS (For Sale) SOLD!! 1986 Delco Bose Radio / Amplifier Service Manuals - CorvetteForum - Chevrolet Corvette Forum Discussion

you'll have to see if someone wrote it down in car's manual or placed somewhere in glove box. Some people tape the code inside the box.

be sure the power and turn on power is wired and fused for radio. Make sure there is no blown fuse on the blue wire.

bottom left of this page has the colors. https://www.scosche.com/media/guides/de821.pdf

See this manual it may help User's Manual AVIC-S1 (pioneerelectronics.com)

Visit the following link Go Technologies: Eurovox FAQs (go-tech.com.au) It may solve your issue

Hi, try the nearest Renault dealer or link: https://www.youtube.com/watch?v=73JXAePX5ac ( https://www.onlineradiocodes.co.uk/renault-radio-codes ) or https://www.code-autoradio.com/en/car-radio-code-renault/ or try to ask google.com (or duckduckgo.com) about "renault clio 2014 radio code"

For Clarion radio codes contact this link with all serial numbers: https://www.gumtree.com/p/in-car-audio-gps/car-radio-codes./1433695581

Download the service manual from KENWOOD KVT-910DVD SERVICE MANUAL Pdf Download ' ManualsLib