Pride Mobility Products Celebrity XL - Answered Questions & Fixed issues

have the batteries load tested as it indicates that they have internal cell failures

Hello.i love to help.but am learning.who is not we learn something new every day.Please try visiting the makers website and ask or ring them.i hope this has helped,i have a scooter myself Colin.

hi have u checked the reset button if this has tripped the scooter wont go give it a push its below the seat....also if u leave the key on for more than 20 minutes the circuit will shut down to fix this remove key then replace key & turn it on ..good luck

Hi,is the bleeping continuous or is there a pause , if so how many bleeps are there before it starts again??.. Regards Rob www.gewizrepairs.co.uk

A mobility service product is a device to aid a patient in being able to ambulate in their home. This can include a cane, walker, manual wheel chair or power wheel chair or "scooter". It may also include devices like a lift chair or slide board, as defined by your insurance company.

The owners manual, the dealer, Medicare, your insurance company, and the manufacturer all should have a record of the SN. The sticker partial number may be enough for the manufacturer to run a search. Hope this helps.

mcdevito75 here, Sounds like an axle or wheel bearing, the back wheel can also be loose. Contact Pride Mobility for repairs.

Hi. The serial number will be on a sticker on the upright support that holds up the seat. You will have to lift of the seat, and take the cover off the batteries to see it. It should be on the front of the deat support. Neil.

the motor will automatically brake the scooter to stopped and keep it locked there until it is running again or put manually in neutral.

Usually when things electrical get wet they fail.

Try this site: https://shoprider.com/resources/user-manuals

From a pure physics standpoint... The energy to climb a hill... be it from the steep side or the gentle sloping side is the same... It is just easier on your heart and joints to take the gentle slope... (assuming you have the time). ERGO: If treating the scooter like a QUEEN is your goal... DEFINITELY GO SLOW. Tat way you will have no idea if it has any weak spots when you need it to go fast (and you will). I'm old... I don't have TIME to waste! Carnac the Magnificent

Maybe too late for this advice but it is important to take a detailed photograph of the wireing before unplugging anything.

Hi not much info is there a red LED & green LED on charger...or is there a red LED & orange led on ?? Bit more info would help cheers

Hi check the main circuit breaker c photo push the white button in to c if it has tripped open cheers

Yes a technician with a programmer can set the control very slow so it is limited on how fast it can go. Otherwise the joystick is meant to be adjustable, so setting it to one speed only not possible. I’m happy to assist further over the phone at https://www.6ya.com/expert/bill_bcbb89783b08c489

hi Linda, can you please tell me what model pride this is ? Regards Rob

Candy Apple paint is extremely hard to patch repair. It has a base coat of silver or gold and then multi coats of the candy apple over the top. You can get a paint that is meant to be a touch up for candy apple but you never end up with the same shade of color. Most of the time it will come out dark blood red anywhere that it over laps the old paint. I would contact Pride as they may use a paint that does not require a base coat.

Check you're freewheel lever if its in freewheel u have to take the key out engage lever & put key back in. Also if u have left the key on for more than twenty minutes the circuit will shut down only the light will work. take key out for 5 minutes then put it back it should work unless it's another problem good luck

Bearing probably.