Top 20 Kohler Forte Two Handle Centerset Lavatory Faucet with Sculpted Lever Handl Questions & Answers

That faucet has a lifetime warranty. Call Kohler (1-800-4-Kohler) and tell them you need a new cartridge for a K-10270 faucet.

The Honey Shop has over 25 years of experience in the field of beekeeping and the production of its products (natural honey, mountain gooseberry, royal jelly and royal jelly), and receive numerous awards and honors, offering the best bee products. At your service, you are the dear customers, and since all the honey is the production of herbalists, you can buy directly from the beekeepers of Khorasan directly and without any intermediary. If you are looking for 100% natural honey, the Honey Store is selling you natural honey and bee products. With free shipping, uncontaminated back guarantee and special and exceptional specials, you can have 100% natural honey To offer you.Some of the objectives of Honey: • Awareness of users about the benefits of bee products • Customer satisfaction, quality improvement and production increase • Replacing natural honey instead of artificial sugar • Easy access to the product and fast delivery of orders • Deliver natural and honey protected areas Delivered to customers • Removing brokers and arguments in the process of delivering products to the customerhttp://asalkade.com

should be a very small set screw at rear base of handle

There is a set screw at the base of the handle.

righty tighty, lefty loosey. if its too tight for wrench youll need a deep socket wrench that will fit it.my hats off to you. kohler makes a good faucet,if stem is shot you can find new ones at lowes.seat is also replaceble

This is due to impurities in the water. The hot water heater separates alot of the crud in the water and the cold water goes right to the sink. adding a filter to your system will prevent the buildup.
Thank you Joe

You should not have to bend any thing go to this page and down to part number 1035564 and open the diagram to the right.
http://kohlerparts.faucetdirect.com/index.cfm?page=product:partsDisplay&productId=K-10270-4&manufacturer=Kohler

Replace the valve cartridge. Instructions are here. http://411plumb.com/kohler-forte-faucet-troubleshooting-repair-guide You can take the cartridge to a plumbing supply store to be sure you get the right replacement. If you replace both, be sure to put the new hot and cold cartridges in the correct places.
Hardware stores carry many cartridges. You can check there first if it is more convenient.

what valve do you have. most likely you will need to replace the cartridges

To remove the plastic insert on your Kohler K-171 kitchen faucet, you can follow these steps: First, turn off the water supply to the faucet. Next, remove the handle of the faucet by unscrewing the set screw on the underside of the handle using a hex wrench or an Allen key. Once the handle is removed, you should see a plastic insert that covers the cartridge. To remove this insert, use a flathead screwdriver to gently pry it off. Once the plastic insert is removed, you should be able to access the cartridge. If you need more detailed instructions, you can refer to the installation manual for your Kohler K-171 kitchen faucet .

There is troubleshooting here https://www.theindoorhaven.com/kohler-dtv-troubleshooting-how-to-guide/ More here https://www.google.com/search?q=kohler+dtv+goes+into+Max+cold ..

Parts diagrams. Instruction for changing are normally on the Kohler website. Or Google make model replace (the part). https://www.google.com/search?q=kohler+model+10430+replacement+parts ..

Question edited to fix the typos. Always worrying when they discontinue lines, and it makes you wonder why? https://www.us.kohler.com/us/taboret-centerset-bathroom-sink-faucet-with-lever-handles/productDetail/product:420060/420060.htm I normally find that they use steel screws and they stick. Make some sort of a dam around the screw with stout polythene like Ziploc bag and electrical tape to seal the base. Then squirt penetrating oil or WD40 in there to cover the screw head. Top it up a couple of times a day and do that for two days. That should loosen it up and get the oil down the threads. Often it is just easier to buy a new set.

call kohler

you tube is the video website

Likely needs a new cartridge.

Look up the Kohler 800 number. Their parts have a lifetime warranty and they will gladly send a replacement part.

vise grip

I assume you mean the separate H/C valve body as opposed to single handle(bath/shower). https://www.us.kohler.com/us/Taboret-t-handles/productDetail/product:417141/417141.htm?skuId=341208 There is one O ring just below threads of body.

Pop the cap off the faucet handle and tighten the screw under it.