20 Most Recent
Stanley 1600PSI Pressure Washer w 20ft Hose Accessories - Page 5 Questions & Answers
HOW DO I RECONNECT THE
Its cheaper to buy a new tape then to go through the frustration of trying to rewind the tape.
How do I load brads
At the lower part of your sharpshooter there is a port,kindly remove it by pulling that port.And after you pulled it put the brads and put it back to the nailed.
My overhead door reopens immediatly
Your door jumped out of synch What you need to do is turn the open close knob on your closer toward the open mode until it stops opening when you close it.
I have never been so
Hi Don,
You sound frustrated. Can't blame you. I've just been searching the internet and it seems no one has them.
My suggestion: Measure the dust bag attachment hole and go to a store that carries shop vacs. See if another brand's 4 gal size will fit.
I have bought ShopVac bags and generic bags for mine (which isn't a ShopVac brand) and they fit fine.
Good luck,
Hope this helps. If it does, I'd appreciate your vote. Thanks,
Handie Andie
I have plaster walls in
Your stud finder keeps beeping because old plaster walls have lath boards behind the plaster that are attached to the studs and running horizontally. Try adjusting the sensitivity of the stud finder by placing it on the wall and turning the sensitivity down until it just stops beeping. Then move it back and forth in a wide enough arc to be sure that you have crossed a stud, turning up the sensitivity ever so slightly until you get a tone when you cross a stud. Hope this works out for you.
Not finding what you are looking for?