20 Most Recent Diamond Products 01738 Core Bore Weka DK12 Drill Motor - Page 7 Questions & Answers

Probably not - I have tried and the industry considers even expensive chargers to be throw away items along with cordless tool batteries. There are plenty of generic circuits available for chargers of all types of battery but none for commercial models. Good cordless tool battery chargers tend to have a good deal of logic circuitry to provide them with an intelligent testing capability and prevent the "attempted" charging of faulty batteries. This makes fault diagnosis difficult and puts the process beyond the scope of the home repairer.

can probably get that part from www.ereplacementparts.com

Reversible drills sort of threw a spanner in the works of established practices of providing a right-hand threaded spindle onto which a chuck was simply spun into place and the final tightening would take place in use. Adopting the Jacob's Taper would have provided the answer but in production cost always has the final word. In desperation some of those early reversing manufacturers opted for adhesive, making replacement practically impossible. Computer aided manufacture hit the industry like a storm and provided the answer by making it economic to provide a left hand threaded counterbore in the conventional threaded spindle allowing standard (or slightly modified) chucks to be retained by a 5mm LH countersunk screw when reversing. The system works well for drill/drivers but the counter screw often becomes damaged and impossible to remove with combi drills used extensively for hammer drilling. Removing a standard keyed chuck has always been fairly simple but keyless chucks, especially low cost keyless chucks fitted to cordless drills can be a huge problem. Corded drills usually have enough torque to be driven in reverse with the chuck held tightly in a vice. Over the years I have failed to remove one chuck, destroyed a couple of chucks in order to remove them and even had to dismantle a couple of drills so the shaft could be gripped in vice jaws...

Some generic label engineered cordless drills used generic batteries - these are mostly the types supplied with a slow charger rather than the 1 hour fast charger though some of the larger tool distributors have managed to source some fairly respectable cordless tools at keen prices, the supplier provides them mostly as throw away tools. The trouble is, few suppliers of those lower price point tools provide spare batteries. If a replacement battery can't be obtained as a spare part from the supplier, for practical purposes it leaves 3 choices... Scrap the drill and start again. Recondition the battery yourself. Have the battery reconditioned by a specialist.

probably will be a hex drive left hand thread screw in the bottom The thread is LH to counter the RH thread of the chuck when using the drill in reverse

Does the battery still charge?? The reason I ask is that some tool mfr's are starting to play with the chargers. Insert the battery and remove within 5 seconds and reinsert and then does the noise go aaway or change? Makita has started doing this and also some others. If the battery charges I wouldn't worry too much but try the above method and see.

Replacement Cordless Drill Battery for Milwaukee M18

Type: Li-ion

Volt: 18V

Capacity: 4000/5000/6000mAh

Color: Black

Weight: 890g

Dimension: 141.15 x 78.00 x 65.95mm

http://www.drill-batteries.co.uk/shopbattery.php/milwaukee_M18_battery.html http://www.drill-batteries.co.uk/shopbattery.php/milwaukee_M18_battery.html

Generally, When your have the 18V milwaukee drill, you had better to use the same voltage battery charger to charge the battery. it will be more safe.John.http://www.anybatteries.com.au/battery-model.php/Power-Tools-Battery_milwaukee.html

Maybe looking for something like this will find you what you want. https://www.amazon.com/IWISS-End-sleeves-Crimping-Electrician-Contractors/dp/B07LCF39W9/ref=sr_1_23?dchild=1&keywords=Ferrule+Crimping+Tool&qid=1593809063&sr=8-23

I took a similar battery apart and was surprised to discover a surprising amount of electronics inside. Clearly the modern lithium type of cordless tool battery is very different from the earlier ni-cad type. The modern charger for lithium type batteries have electronics inside that qualify them as "intelligent". They can "see" inside the battery and will refuse to charge any battery it is not safe to charge, either because there is a danger to the charger or because there is a danger of fire or explosion of the battery. Unless you are confident the charger has a fault it is best to believe it. It certainly isn't wise to attempt "jump starting" it due to the relatively large amount of current contained in such a battery. There are dotted around the world, companies that will recondition cordless tool batteries much cheaper in many cases than the manufacturer's replacements.

reverse switch failure

failing battery

https://www.youtube.com/watch?v=3VUTRk9Ng9w

I have actually used cordless drills for all my household's cleansing jobs so far. Functions well, yet the second battery will not bill as I delivered. I just kept utilizing the exact same type of battery in the pack, yet I had another weekend job that required me to replace the batteries many times. Or what to do. https://www.impactwrenchguides.com/best-cordless-drill-under-100/

Remove the battery and place it somewhere warm and when dry connect it to the charger to ensure it is still ok. The mower will probably need partially dismantling in order to thoroughly dry the internal electrical/electronic parts with a hair dryer or similar - it can take a considerable time and if you are lucky the water + power won't have damaged the electronics...

Arbitrage Recycling Solution is one among the best lithium ion recycling company in UK. It is highly focused on strategic approaches to deliver easy recycling across industries.

You need to know the hole diam. where the key goes and the max size for the chuck. 1/2 3/8 Grainger has your key when you know what to order.

broken shaft not many places would have this but a salvage yard

Found Ryobi P505 18v battery. Compare it to what you already have. Stores have other brands if this does not match. Was listed at The Home Depot.

lots of WD-40 double channel locks and strong person. work it a little at a time to avoid damage.