Top 20 Nordic Track NordicTrack Commercial 1500 Treadmill - Page 3 Questions & Answers

No weight limit

SORRY BUT THIS IS NOT NORDIC TRACK TECH SUPPORT

the rollers are not aligned. Check the manual for adjustment procedures.

https://www.manualslib.com/manual/583110/Nordictrack-Commerical-2450-Treadmill.html?page=27 Quoting from manual above (may be similar model if not the same.) 7. Turn on or turn off the display demo mode. The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, press the power switch into the reset position, and insert the key into the console. However, when you remove the key, the screen will show a demo presentation. To turn on or turn off the display demo mode, first touch the Demo Mode button. Next, touch the On checkbox or the Off checkbox.

Hello

The servo motor which changes the resistance (under the plastic covers) is winding the cable in the wrong direction. Release tension on the cable by pulling the magnets away from the fly wheel and flip the cable off the the servo motor pulley, this will allow the cable to be pulled in the correct direction.

Try spraying silicone spray under the belt. It worked on mine. You can buy spray cans from a Hardware or Bunnings etc.

Controller . I aman authourised repairer for the brand in Australia .

My treadmill has a little steel rod that flips in and holds the bed up' When you want the bed down you pull the rod back out and it lets it come back down.

https://www.manualslib.com/manual/786359/Nordictrack-Ntl14908-0.html

USE THE WARRANTY

It would appear via one video and someone else's post that it is at the front of the machine, directly above the crossbar that contacts the floor.

Sounds like the overlay on the console has stopped working. If you get beeps on all buttons but not the ones in question, this will need replacing. It’s quite an easy job once you have the parts. Try eBay or the shop you got it from.

GO to Nordic track website and look under support. It should direct you to what error codes mean.

Try this https://support.nordictrack.com/contact-us

check to see if there is a smaller board in the unit. There maybe relays between the main board and the motor.

https://service.nordictrack.com/CustomerService/pdfDownload.do?fileName=NTL19007.0-259851.pdf&directory=%2Fpdf%2F According to the manual ... you need the hex drive key to adjust the belt back to the center

It’s your motor controller.

Proform Treadmill Incline Problem Fixed How to reset re calibrate your treadmill Please see this video for to help you to fix it in incline and calibration incline motor Blessing [email protected] cell+whatsApp: +50588611441

Hello, PJ1989 - I suggest you contact NordicTrack Customer Service directly and explain your problem: https://support.nordictrack.com/contact-us/ You may need Nordic Track authorized repair service.