Precor 927 Treadmill - Answered Questions & Fixed issues


How long have you let it run for after turning it back on ? Some treadmills have a re calibration test built in and will incline to the max and work its way down. During this time you should simply walk away and not touch anything as it trys to calibrate its self. If not i will need more information on it

Precor 927... | Answered on Mar 18, 2013 | 262 views


I had the speed error on my precor 9.23. When I opened it up I found that there are two little round magnets on the belt pulley with a sensor mounted nearby. This must be how the computer know the speed of the treadmill. I noticed that there were several little metal shavings stuck to the magnets. Not sure where they came from, hopefully not another problem. However, I removed the metal shavings from the magnets and everything worked fine again. If anyone else has the speed error it might be worth a look to see if its the same problem.

Precor 927... | Answered on Mar 18, 2013 | 815 views


hi it seems like the running belt is too loose try tighten it. you should be able to lift the belt up 2 to 3 inches if more then def tighten the belt. after this if the problem is still there then the belt on the motor needs adjusting.

Precor 927... | Answered on Nov 21, 2010 | 194 views


Are you sure the PSU is functioning? Check it with a multimeter set for DC Voltage. Compare what it is putting out to what the factory specs are.

Precor Exercise... | Answered on Mar 23, 2019 | 124 views

Not finding what you are looking for?
Precor 927 Treadmill Logo

7 questions posted

Ask a Question

Usually answered in minutes!

Top Precor Exercise & Fitness Experts

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

135 Answers

Tom Chichester

Level 3 Expert

53029 Answers

Rick Hickerson
Rick Hickerson

Level 2 Expert

119 Answers

Are you a Precor Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...